A new wireless interface for resistive chemical sensors
- 1 February 2014
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
This paper presents the design, realization, and performance measurements of a wireless interface prototype for chemoresistive sensors. The new design aims at reducing the hardware components of the sensing node in order to have an efficient sensing mechanism in terms of time and power consumption. In our design the signal transmitted by the sensing node is directly proportional to the sensing film resistance. This means that minimum signal conditioning and no data processing at all are needed. With conventional sensing node, the processing time to produce an output signal from the measurement may have a significant impact. With our approach, this time is only needed on the sink node where higher performance processors can be used. The system is tested with a commercial variable resistance gas sensor (MOX) and proved to be suitable for various combinations of CO and NO 2 gas concentrations.Keywords
This publication has 10 references indexed in Scilit:
- Wireless smart tag with potentiometric input for ultra low-power chemical sensingSensors and Actuators B: Chemical, 2013
- Versatile measurement system for the characterization of gas sensing materials2013
- A Wireless Electronic Nose System Using a Fe2O3 Gas Sensing Array and Least Squares Support Vector RegressionSensors, 2011
- Metal-oxide nanowire sensors for CO detection: Characterization and modelingSensors and Actuators B: Chemical, 2010
- Wireless electronic nose system for real-time quantitative analysis of gas mixtures using micro-gas sensor array and neuro-fuzzy networkSensors and Actuators B: Chemical, 2008
- Monitoring chemical plumes in an environmental sensing chamber with a wireless chemical sensor networkSensors and Actuators B: Chemical, 2007
- Surface State Model for Conductance Responses During Thermal-Modulation of SnO$_{2}$-Based Thick Film Sensors: Part II—Experimental VerificationIEEE Transactions on Instrumentation and Measurement, 2006
- Remote monitoring system with wireless sensors module for room environmentSensors and Actuators B: Chemical, 2006
- Dynamic CO recognition in presence of interfering gases by using one MOX sensor and a selected temperature profileSensors and Actuators B: Chemical, 2005
- The design space of wireless sensor networksIEEE Wireless Communications, 2004