Influence of electrode apodization weighted structure on the performance of SAW temperature sensors
- 2 June 2023
- journal article
- research article
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 33 (7) , 075006
Abstract
In order to improve the comprehensive performance of the surface acoustic wave (SAW) temperature sensors and reduce clutter interference, the optimized Chebyshev window function, Blackman window function and Hamming window function are used to carry out the apodization weighting design for interdigital transducer (IDT) and reflective grating respectively. The influence of electrode apodization weighted structure on the performance of SAW temperature sensors is systematically studied through experiments. The results show that the apodization weighted design of IDT and reflective gate can effectively improve the resonance peak intensity and reduce the side lobe interference; the IDT and the reflection grating are designed with apodization weighting at the same time, compared with the single reflection grating weighting, the volatility of the side lobe of the Chebyshev window function and the Hamming window function increases, the volatility of the side lobe of the Blackman window function decreases; after electrode apodization optimization, the resonance frequency, Q value of the SAW sensor and the sensitivity to temperature increases; using a hamming window optimized electrode structure, the peak value of S11 is −36.73 dB and the Q value is 15 030. In order to ensure the signal processing ability and comprehensive performance of the sensor, an optimized Hamming window should be used for the electrode design of the SAW sensors.Keywords
This publication has 10 references indexed in Scilit:
- A langasite surface acoustic wave wide-range temperature sensor with excellent linearity and high sensitivityAIP Advances, 2021
- IDT Structure Optimization Design based on ALN/SI Substrate for Saw Devices2020
- High Temperature SAW Sensors on LiNbO3 Substrate With SiO2 Passivation LayerIEEE Sensors Journal, 2019
- Impact of device parameters on performance of one-port type SAW resonators on AlN/sapphireJournal of Micromechanics and Microengineering, 2018
- AlN/Pt/LN structure for SAW sensors capable of operating at high temperatureApplied Physics Letters, 2017
- Novel AlN/Pt/ZnO Electrode for High Temperature SAW SensorsMaterials, 2017
- Effects of AlN Coating Layer on High Temperature Characteristics of Langasite SAW SensorsSensors, 2016
- Optimization of frequency characteristics for SAW device using apodization weighting methodOptoelectronics Letters, 2015
- Evolution of the SAW transducer for communication systems2005
- Wavefront Distortion of Acoustic Surface Waves from Apodized Interdigital TransducersApplied Physics Letters, 1971