Hybrid controller of magnetorheological semi-active seat suspension system for both shock and vibration mitigation
- 24 April 2019
- journal article
- research article
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 30 (11) , 1613-1628
Abstract
The impact caused by the detonation of landmines and improvised explosive devices may directly lead to spine fracture and injury of seated occupants on special vehicles. The vibration transmitted from the uneven road surface is another important factor affecting ride comfort/health, on the other hand. Aiming at minimizing the injury to spine and “discomfort” due to the shock and vibration from the terrain or blast, a magnetorheological (MR) energy absorber (EA)–based semi-active seat suspension system for both shock and vibration mitigation is proposed and investigated in this article. The proposed MR semi-active seat suspension system consists of a coil spring supporting the seat and the occupant, a MREA, and a fail-safe EA rod. The dynamic model of the MR semi-active seat suspension system with a 4-degree-of-freedom lumped-parameter model for seated occupant is established. A concept of integrated hybrid controller combining strategies for shock and vibration control is proposed and designed. The hybrid controller employs the skyhook control strategy to achieve vibration control and the “soft-landing” control strategy to achieve shock control, and it switches between the two control strategies according to the system dynamic states. Based on the real-time velocity of the seat, the motion process of the “vehicle-seat-human” system can be pre-judged, and the critical point for switching the two control strategies can be determined. A feedforward control strategy based on a hysteresis model with a resistor-capacitor (RC) operator is proposed and realized to high-efficiently output desired damping force of the hybrid controller from the employed MREA. Sequentially, both ride comfort (i.e. vibration control) and vertical safety (i.e. shock control) of the MR semi-active seat suspension system are analyzed and evaluated under different excitations.Keywords
Funding Information
- Key Research and Development Projects of Anhui Province (Grant No. 1704E1002211)
- Fundamental Research Funds for the Central Universities (Grant No. JZ2017HGTB0202)
This publication has 38 references indexed in Scilit:
- Development and simulation evaluation of a magnetorheological elastomer isolator for seat vibration controlJournal of Intelligent Material Systems and Structures, 2012
- Semi-active variable stiffness vibration control of vehicle seat suspension using an MR elastomer isolatorSmart Materials and Structures, 2011
- Adaptive Energy Absorbers for Drop-induced Shock MitigationJournal of Intelligent Material Systems and Structures, 2011
- Vibration Control of Seat Suspension using H∞ Reliable ControlJournal of Vibration and Control, 2010
- The ride comfort vs. handling compromise for off-road vehiclesJournal of Terramechanics, 2007
- Vibration control of electrorheological seat suspension with human-body model using sliding mode controlJournal of Sound and Vibration, 2007
- Suspension settings for optimal ride comfort of off-road vehicles travelling on roads with different roughness and speedsJournal of Terramechanics, 2007
- Mitigation of biodynamic response to vibratory and blast-induced shock loads using magnetorheological seat suspensionsProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2005
- Vibration Control of a MR Seat Damper for Commercial VehiclesJournal of Intelligent Material Systems and Structures, 2000
- A SEMI-ACTIVE CONTROL POLICY TO REDUCE THE OCCURRENCE AND SEVERITY OF END-STOP IMPACTS IN A SUSPENSION SEAT WITH AN ELECTRORHEOLOGICAL FLUID DAMPERJournal of Sound and Vibration, 1997