Novel monolithic stirred reactor
Authors:
- 1 November 1998
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 44 (11) , 2459-2464
Abstract
A novel reactor configuration in which blocks of monoliths are arranged in a stirrer‐like configuration was studied. A substantial liquid flow rate can be realized through the monolith blades at relatively low power input, owing to the high permeability of the monolithic structure. The inside of the monolithic channels can be coated with a thin layer of either a conventional catalyst or a biocatalyst, thereby eliminating many of the problems associated with using a suspended catalyst. The basic relationship among stirrer speed, geometry, liquid viscosity, and the resulting torque and flow through the blades were studied. Furthermore, the fast decomposition of a dilute, aqueous hydrogen peroxide solution was used to characterize the rate of external mass transfer.Keywords
This publication has 7 references indexed in Scilit:
- Evaluation of trickle bed reactor models for a liquid limited reactionChemical Engineering Science, 1996
- Alumina-Supported Manganese Oxide CatalystsJournal of Catalysis, 1994
- Monoliths in Heterogeneous CatalysisCatalysis Reviews, 1994
- Monolithic reactors: mass transfer measurements under reacting conditionsChemical Engineering Science, 1992
- Effectiveness factor in a three-phase spinning basket reactor: hydrogenation of butynediolIndustrial & Engineering Chemistry Research, 1990
- DESIGNING LABORATORY CATALYTIC REACTORSIndustrial & Engineering Chemistry, 1964
- Correlation of diffusion coefficients in dilute solutionsAIChE Journal, 1955