Selective Localization of Carbon Black in Bio-Based Poly (Lactic Acid)/Recycled High-Density Polyethylene Co-Continuous Blends to Design Electrical Conductive Composites with a Low Percolation Threshold
Open Access
- 27 September 2019
- Vol. 11 (10) , 1583
Abstract
The electrically conductive poly (lactic acid) (PLA)/recycled high-density polyethylene (HDPE)/carbon black (CB) composites with a fine co-continuous micro structure and selective localization of CB in the HDPE component were fabricated by one-step melt processing via a twin-screw extruder. Micromorphology analysis, electrical conductivity, thermal properties, thermal stability, and mechanical properties were investigated. Scanning electron microscope (SEM) images indicate that a co-continuous morphology is formed, and CB is selectively distributed in the HDPE component. With the introduction of CB, the phase size of the PLA component and the HDPE component in PLA/HDPE blends is reduced. In addition, differential scanning calorimetry (DSC) and thermos gravimetric analysis (TGA) results show that the introduction of CB promotes the crystallization behavior of the PLA and HDPE components, respectively, and improves the thermal stability of PLA70/30HDPE/CB composites. The electrically conductive percolation threshold of the PLA70/30HDPE/CB composites is around 5.0 wt %, and the electrical conductivity of PLA70/30HDPE/CB composites reaches 1.0 s/cm and 15 s/cm just at the 10 wt % and 15 wt % CB loading, respectively. Further, the tensile and impact tests show that the PLA70/30HDPE/CB composites have good mechanical properties. The excellent electrical conductivity and good mechanical properties offer the potential to broaden the application of PLA/HDPE/CB composites.Keywords
This publication has 34 references indexed in Scilit:
- Structural and phase separation characterization of poly(lactic acid)/poly(ethylene oxide)/carbon nanotube nanocomposites by rheological examinationsComposites Part B: Engineering, 2018
- Enhanced electrical conductivity and mechanical properties of ABS/EPDM composites filled with grapheneComposites Part B: Engineering, 2015
- Control of carbon nanotubes at the interface of a co-continuous immiscible polymer blend to fabricate conductive composites with ultralow percolation thresholdsCarbon, 2014
- Morphology and thermal behavior of poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/poly(butylene adipate‐co‐terephthalate)/clay nanocompositesPolymer Composites, 2014
- Selective Localization Behavior of Carbon Nanotubes: Effect on Transesterification of Immiscible Polyester BlendsMacromolecular Chemistry and Physics, 2011
- Selective Localization of Nanofillers: Effect on Morphology and Crystallization of PLA/PCL BlendsMacromolecular Chemistry and Physics, 2011
- Blend composition dependence of the compatibilizing efficiency of graft copolymers for immiscible polymer blendsPolymer Engineering & Science, 2010
- Selective Localization and Migration of Multiwalled Carbon Nanotubes in Blends of Polycarbonate and Poly(styrene‐acrylonitrile)Macromolecular Rapid Communications, 2009
- Chemical reactions between immiscible polymers in the melt: Transesterification of poly(ethylene‐co‐methyl acrylate) with mono‐hydroxylated polystyrenesJournal of Polymer Science Part A: Polymer Chemistry, 1995
- Mechanical compatibilization of immiscible blendsPolymer Engineering & Science, 1984