Design Optimization of Casing Grooves Using Zipper Layer Meshing
Authors:
- Ning QinNing Qin
- Greg CarnieGCGreg Carnie
- 26 September 2013
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 136 (3) , 031002
Abstract
A new algorithm, named the zipper layer method, has been developed to link multiblock meshes for groove-casing optimization applications. Numerical results for a turbomachinery rotor flow case are included to demonstrate the solution behavior across the zipper layer mesh. By using this new meshing methodology, the optimization of the casing groove geometries in relation to stall margin and efficiency of a transonic rotor is conducted. Six grooves are parameterized by their independent depths and a width to gap ratio. An advanced response surface method based on the Sobol design of experiment (DoE) and the Kriging response surface model (RSM) are used for the optimization. A leave-one-out cross-validation (LOOCV) method is used to calculate the quality of the response surface metric. The final optimized groove configuration is obtained through an optimization cycle using the Rolls-Royce SOPHY (SOFT-PADRAM-HYDRA) software (Shahpar, S., 2005, “SOPHY: An Integrated CFD Based Automatic Design Optimisation System,” Report No. ISABE-2005-1086), which not only improves the stall margin (SM) of the rotor but also maintains its peak efficiency.Keywords
This publication has 15 references indexed in Scilit:
- Parametric Study of Tip Clearance—Casing Treatment on Performance and Stability of a Transonic Axial CompressorJournal of Turbomachinery, 2004
- Flow Mechanism for Stall Margin Improvement due to Circumferential Casing Grooves on Axial CompressorsJournal of Turbomachinery, 2004
- Experimental Investigation of Stepped Tip Gap Effects on the Performance of a Transonic Axial-Flow Compressor RotorJournal of Turbomachinery, 1998
- Experimental and Computational Investigation of the Tip Clearance Flow in a Transonic Axial Compressor RotorJournal of Turbomachinery, 1996
- Prediction of Unshrouded Rotor Blade Tip Heat Transfer1995
- Measurement of the Three-Dimensional Tip Region Flow Field in an Axial CompressorJournal of Turbomachinery, 1993
- The Role of Tip Clearance in High-Speed Fan StallJournal of Turbomachinery, 1993
- Stall Inception in Axial CompressorsJournal of Turbomachinery, 1990
- A Comparison Between the Design Point and Near-Stall Performance of an Axial CompressorJournal of Turbomachinery, 1990
- Behavior of Tip Leakage Flow Behind an Axial Compressor RotorJournal of Engineering for Gas Turbines and Power, 1986