Breathing simulator of workers for respirator performance test
Open Access
- 1 January 2015
- journal article
- Published by National Institute of Industrial Health in Industrial Health
- Vol. 53 (2) , 124-131
Abstract
Breathing machines are widely used to evaluate respirator performance but they are capable of generating only limited air flow patterns, such as, sine, triangular and square waves. In order to evaluate the respirator performance in practical use, it is desirable to test the respirator using the actual breathing patterns of wearers. However, it has been a difficult task for a breathing machine to generate such complicated flow patterns, since the human respiratory volume changes depending on the human activities and workload. In this study, we have developed an electromechanical breathing simulator and a respiration sampling device to record and reproduce worker's respiration. It is capable of generating various flow patterns by inputting breathing pattern signals recorded by a computer, as well as the fixed air flow patterns. The device is equipped with a self-control program to compensate the difference in inhalation and exhalation volume and the measurement errors on the breathing flow rate. The system was successfully applied to record the breathing patterns of workers engaging in welding and reproduced the breathing patterns.Keywords
This publication has 14 references indexed in Scilit:
- Performance of an N95 Filtering Facepiece Particulate Respirator and a Surgical Mask During Human Breathing: Two Pathways for Particle PenetrationJournal of Occupational and Environmental Hygiene, 2009
- Inspiratory Flow Rates During Hard Work When Breathing Through Different Respirator Inhalation and Exhalation ResistancesJournal of Occupational and Environmental Hygiene, 2006
- Breakthrough of Shallow Activated Carbon Beds Under Constant and Pulsating FlowAIHA Journal, 2003
- Simulated Workplace Protection Factor Study of Powered Air-Purifying and Supplied Air RespiratorsAIHA Journal, 2001
- Breakthrough Time of a Respirator Cartridge for Carbon Tetrachloride Vapor Flow of Workers' Respiratory Patterns.Industrial Health, 1996
- Collection of Silica and Asbestos Aerosols by Respirators at Steady and Cyclic FlowAIHA Journal, 1990
- Breathing Pattern Simulation Using Slit/Cam ValveAIHA Journal, 1989
- Inhalation Exposure of Lead in Brass Foundry Workers: The Evaluation of the Effectiveness of a Powered Air-Purifying Respirator and Engineering ControlsAIHA Journal, 1983
- Quantitative fit-test method for powered air-purifying respiratorsAIHA Journal, 1979
- Respirator Cartridge Efficiency Studies IV. Effects of Steady-State and Pulsating FlowAIHA Journal, 1972