Precipitation Hardening of the Electrical Conductor Aluminum Alloy 6201
Open Access
Abstract
Aluminum alloy 6201 is a wrought, heat-treatable alloy, which is used in electricity transmission and distribution lines. The alloy is processed in a commercial continuous casting and rolling system, which includes a series of in-line thermomechanical processes involving hot working, quenching, cold working and artificial aging. In this study and following cold working, the alloy is subjected to a solution heat treatment at 510 °C for an hour, quenched in ice water, and artificially aged at various temperatures for various times (150–200 °C for 2–30 h) (T6-temper) in order to investigate the effect of precipitation on mechanical properties and electrical conductivity. The results show that optimum mechanical properties and electrical conductivity were obtained after artificial aging at 155 °C for 30 h (155-30). The tensile strength was almost equal to that of the as received cold drawn wire of 326 MPa, but interestingly, electrical conductivity significantly increased to 58.6% IACS from a value of 52.7% IACS of the as received cold drawn wire. Intermetallic particles α-AlFeSi (Al8Fe2Si) and β-AlFeSi (Al5FeSi and Al9Fe2Si2) were observed in all samples, which were nucleated during solidification and homogenization; they were not affected by the aging process. β″/β′/β -precipitates formed during artificial aging, which affected the final mechanical properties and the final electrical conductivity.Keywords
This publication has 28 references indexed in Scilit:
- A modified processing route for high strength Al-Mg-Si aluminum conductors based on twin-roll cast stripJournal of Materials Processing Technology, 2020
- Improvement of the mechanical properties of Al–Mg–Si alloys with nano-scale precipitates after repetitive continuous extrusion forming and T8 temperingJournal of Materials Research and Technology, 2019
- Development of High-Strength and High-Electrical-Conductivity Aluminum Alloys for Power Transmission Conductors2018
- Enhanced strength and electrical conductivity of ultrafine-grained Al-Mg-Si alloy processed by hydrostatic extrusionMaterials Characterization, 2018
- Enhanced Mechanical Properties and Electrical Conductivity in Ultrafine-Grained Al 6101 Alloy Processed via ECAP-ConformMetals, 2015
- Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products2015
- Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes2015
- Modification of Conductive Material AA6101 of OPGW Conductors against Lightning StrikesStrojniški vestnik - Journal of Mechanical Engineering, 2013
- Modification of AA-6201 alloy for manufacturing of high conductivity and extra high conductivity wires with property of high tensile stress after artificial aging heat treatment for all-aluminium alloy conductorsMaterials & Design (1980-2015), 2006
- The effect of strontium on the Mg2Si precipitation process in 6201 aluminum alloyMetallurgical and Materials Transactions A, 1997