Study on roof movement law of local filling mining under peak cluster landform
Authors:
Open Access
- 7 September 2023
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-15
Abstract
The strip structure filling mining technology is suggested in response to the environmental issues such as surface subsidence and landslides brought on by the mining of 11,071 working faces in a mine in Guizhou. The mining technology system is studied through indoor testing, numerical simulation, and engineering monitoring. According to theoretical study, the filling strip can be steadily loaded and its value doesn't exceed 10 m when the width of the filling strip and the width of the filling interval are set to be equal. According to laboratory testing, fly ash can replace some of the cement in the cement mixture as a binder to maintain strength while cutting costs. The degree of crystallization gradually distributed into the network in the filling paste of various ages corresponds to its strength when combined with the findings of scanning electron microscopy; The numerical simulation results show that the maximum subsidence of the immediate roof is reduced from 340 to 3 mm from the filling rate of 0 to 100%, the filling effect is remarkable, and the shape of the settlement curve is changed from 'U' to 'basin', then to 'W'; during the local filling mining, the settlement curve of the immediate roof presents a 'wave' shape, and the stress curve of the immediate roof in the middle of the stope is also changed. The peak tension of the coal wall falls synchronously with filling spacing on both sides of the stope. The overall vertical stress below the mountain is larger, and the vertical stress at the top of the filling body eventually shifts from a "saddle" shape to a "inverted U" shape without zero support stress. In conjunction with the plastic zone, it is discovered that the stable bearing of the "filling strip-direct roof" composite structure increases with decreasing tensile and shear damage range of the hollow roof area and both sides of the top of the "filling 3 m interval 3 m" scheme; engineering measurement also reveals that the higher the position of the survey line is, the smaller the displacement is. However, the overall displacement of the strata directly above is negligible, and the greatest displacement is only 10.9 mm, which is consistent with the numerical simulation. At the same time, the displacement beneath the mountain area is too great.Keywords
Funding Information
- Guizhou Minzu University (Qiandi Mining Association [2021]16)
This publication has 16 references indexed in Scilit:
- Physico-mechanical and microstructure properties of cemented coal Gangue-Fly ash backfill: Effects of curing temperatureConstruction and Building Materials, 2021
- Experimental Study on the Characteristics of Activated Coal Gangue and Coal Gangue-Based GeopolymerEnergies, 2020
- New coal pillar strength formulae considering the effect of interface frictionInternational Journal of Rock Mechanics and Mining Sciences, 2019
- Evaluation of Mechanical Properties and Microscopic Structure of Coal Gangue after Aqueous Solution TreatmentMaterials, 2019
- Simulating the sustainable effect of green mining construction policies on coal mining industry of ChinaJournal of Cleaner Production, 2019
- Surface subsidence prediction method of backfill-strip mining in coal miningBulletin of Engineering Geology and the Environment, 2019
- Global demand for rare earth resources and strategies for green miningEnvironmental Research, 2016
- Study on the width of the non-elastic zone in inclined coal pillar for strip miningInternational Journal of Rock Mechanics and Mining Sciences, 2014
- Mining-induced movement properties and fissure time-space evolution law in overlying strataInternational Journal of Mining Science and Technology, 2012
- Reduction of surface subsidence risk by fly ash exploitation as filling material in deep mining areasNatural Hazards, 2009