Seismic control performance of a three‐story frame prototype equipped with semi‐active variable stiffness and damping structural joints
Open Access
- 23 July 2021
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 50 (13) , 3379-3402
Abstract
This paper presents numerical and experimental studies on semi‐active seismic response control of structures equipped with variable stiffness and damping structural joints. Such adaptive joints, which are comprised of a shape memory polymer (SMP) core reinforced by an SMP‐aramid composite skin, function as load‐transfer components as well as semi‐active control devices. The SMP core material can transition from a glassy to a rubbery state through thermal actuation resulting in a shift of the structural natural frequencies and a parallel increase of damping ratio, which enables a new semi‐active control strategy. Control performance has been evaluated on a three‐story frame equipped with 12 adaptive joints and subjected to seismic excitations. Full‐transient analysis has shown that when the joints are thermally actuated to the transition temperature (65°C), acceleration and base shear are reduced by up to 62% and 65%, respectively. Shake‐table tests have been carried out on a 1/10‐scale prototype, confirming that through thermal actuation of the adaptive joints the structural damping ratio increases from 2.6% to 11.3% and the first natural frequency shifts by up to 37%. As the structure becomes more flexible, an increase of displacements and interstory drift might occur. However, depending on the seismic excitation, top‐story acceleration and base shear are significantly reduced in the range 43%–50% and 35%–51%, respectively. These results confirm that semi‐active control through thermal actuation of variable stiffness and damping structural joints is effective to mitigate the structure response under seismic excitation.Keywords
Funding Information
- China Scholarship Council
This publication has 32 references indexed in Scilit:
- A state-of-the-art review of structural control systemsJournal of Vibration and Control, 2013
- Adaptive Negative Stiffness: New Structural Modification Approach for Seismic ProtectionJournal of Structural Engineering, 2013
- Adaptive passive, semiactive, smart tuned mass dampers: identification and control using empirical mode decomposition, hilbert transform, and short-term fourier transformStructural Control and Health Monitoring, 2009
- Benchmark Problem for Response Control of Wind-Excited Tall BuildingsJournal of Engineering Mechanics, 2004
- Benchmark Control Problems for Seismically Excited Nonlinear BuildingsJournal of Engineering Mechanics, 2004
- State of the Art of Structural ControlJournal of Structural Engineering, 2003
- Semi-active control systems for seismic protection of structures: a state-of-the-art reviewEngineering Structures, 1999
- Passive Control Systems for Seismic Damage MitigationJournal of Structural Engineering, 1998
- Seismic response controlled structure with Active Variable Stiffness systemEarthquake Engineering & Structural Dynamics, 1993
- Full‐Scale Implementation of Active Control. II: Installation and PerformanceJournal of Structural Engineering, 1993