A high-efficiency 28GHz outphasing PA with 23dBm output power using a triaxial balun combiner
Authors:
- 1 February 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 174-176
Abstract
Gigabit-per-second millimeter-wave (mm-wave) access and backhaul networks at 28GHz demand high-order QAM, OFDM, and/or carrier-aggregated waveforms that force the PA to operate under high peak-to-average power ratio (PAPR) [1]. High PAPR requirements aggravate the design of mm-wave Si CMOS and SiGe BiCMOS PAs since a linear response and high efficiency are simultaneously desired. Recent work has demonstrated mm-wave PAs with peak efficiency exceeding 30% at 28GHz for output powers above 20dBm [1-5]. However, high average efficiency associated with high-PAPR waveforms remains elusive. To improve average efficiency, circuit techniques based on Doherty [3] and outphasing [6] have been demonstrated in mm-wave bands. Earlier work using these techniques showed average efficiency with QAM waveforms that is well under 20%.Keywords
This publication has 6 references indexed in Scilit:
- A 28-GHz SiGe BiCMOS PA With 32% Efficiency and 23-dBm Output PowerIEEE Journal of Solid-State Circuits, 2017
- 2.7 A wideband 28GHz power amplifier supporting 8×100MHz carrier aggregation for 5G in 40nm CMOS2017
- 2.1 A 28GHz/37GHz/39GHz multiband linear Doherty power amplifier for 5G massive MIMO applications2017
- A 28-GHz Harmonic-Tuned Power Amplifier in 130-nm SiGe BiCMOSIEEE Transactions on Microwave Theory and Techniques, 2017
- 20.6 A 28GHz efficient linear power amplifier for 5G phased arrays in 28nm bulk CMOS2016
- Millimeter-Wave Series Power Combining Using Sub-Quarter-Wavelength BalunsIEEE Journal of Solid-State Circuits, 2014