Development of a Machine for Closely Controlled Rolling Contact Fatigue and Wear Testing
Authors:
- 1 July 2000
- journal article
- research article
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 28 (4) , 267-275
Abstract
In order to gain detailed insight into the processes taking place during rolling contact fatigue (RCF) and rolling contact wear, the test machine used must be closely controllable and offer comprehensive data collection facilities. This paper describes a machine that has been developed to offer these facilities over a wide range of test conditions, and that has the facility for the early detection of cracks by an eddy current method. An existing twin-disk contact simulation machine has been comprehensively updated to enhance the range of tests possible and, most importantly, to offer close control over very short numbers of machine cycles, allowing the very early stages of the development of fatigue cracks and wear damage to be examined. Results of tests to examine the capabilities of the rebuilt machine and a study of the repeatability of results under two particular test conditions are presented.Keywords
This publication has 12 references indexed in Scilit:
- A Possible Mechanism for Rail Dark Spot DefectsJournal of Tribology, 1998
- Surface initiated fatigue of pearlitic and bainitic steels under water lubricated rolling/sliding contactWear, 1996
- Deterioration of rolling contact fatigue life of pearlitic rail steel due to dry-wet rolling-sliding line contactWear, 1996
- The steady state wear behaviour of pearlitic rail steel under dry rolling-sliding contact conditionsWear, 1995
- The effect of rolling direction reversal on the wear rate and wear mechanism of pearlitic rail steelTribology International, 1994
- Improvements in rail maintenance techniques and manufacturing processesProceedings of the Institution of Civil Engineers - Transport, 1993
- The early detection of rolling-sliding contact fatigue cracksWear, 1991
- The Influence of Crack Face Friction and Trapped Fluid on Surface Initiated Rolling Contact Fatigue CracksJournal of Tribology, 1988
- Theory of Elasticity (3rd ed.)Journal of Applied Mechanics, 1970
- Pitting Due to Rolling ContactJournal of Applied Mechanics, 1935