A phenomenological model for fiber tow saturation of dual scale fabrics in liquid composite molding
- 19 March 2010
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 31 (11) , 1881-1889
Abstract
Advanced composites are manufactured by liquid composite molding by impregnating a thermoset resin into a stationary woven or stitched preform. For a successful injection, the manufactured part should fill all the empty spaces between the fiber tows and inside the fiber tows with the resin. The fiber tows in such preforms have orders of magnitude lower permeability than the regions between the fiber tows, which makes them difficult to fill and hence susceptible to formation of microvoids. Numerical simulations can address the filling of fiber tows but it is difficult to capture the essential physics of their filling in a model created entirely from first principles due to the complexity of the flow which involves anisotropic permeability of flow along and across a fiber tow, uneven packing, fiber sizing, capillarity and the treatment of entrapped air. Hence, in this article we adopt a phenomenological approach in which we compare some of the possible models with an experimental procedure. The experimental procedure provides a quantitative measure of the filling of fiber tows during the impregnation process. A numerical simulation based on the dual scale flow was developed with different constitutive models that described the filling of the fiber tows. The predictions of the different models are compared with the experimental results under different processing conditions to select the model that most accurately describes the tow filling behavior. POLYM. COMPOS., 31:1881–1889, 2010. © 2010 Society of Plastics Engineers.Keywords
Funding Information
- Office of Naval Research through Advanced Materials Intelligent Processing Center (N00014-06-1-1000)
This publication has 23 references indexed in Scilit:
- Analytic characterization of the permeability of dual-scale fibrous porous mediaComposites Science and Technology, 2006
- Dependence Map-Based Flow Control to Reduce Void Content in Liquid Composite MoldingMaterials and Manufacturing Processes, 2005
- Desirable features in mold filling simulations for Liquid Composite Molding processesPolymer Composites, 2004
- A numerical model to predict fiber tow saturation during liquid composite moldingComposites Science and Technology, 2003
- An experimental study of the permeability and capillary pressure in resin-transfer mouldingComposites Science and Technology, 2001
- Investigation of unsaturated flow in woven, braided and stitched fiber mats during mold‐filling in resin transfer moldingPolymer Composites, 2001
- Measurements of the permeability of fiber preforms and applicationsComposites Science and Technology, 2000
- Tow Impregnation Model and Void Formation Mechanisms during RTMJournal of Composite Materials, 1998
- Numerical simulation of unsaturated flow in woven fiber preforms during the resin transfer molding processPolymer Composites, 1998
- A finite element/control volume approach to mold filling in anisotropic porous mediaPolymer Composites, 1990