Effect of cyclization degree of nitrogen thermal pretreatment on radial structure of PAN stabilized fibers
- 6 July 2024
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 141 (37)
Abstract
The effect of cyclization degree of nitrogen thermal pretreatment on the radial structure difference of polyacrylonitrile(PAN) oxide fibers is explored. In this paper, PAN fibers were isothermally heated in nitrogen at 170°C, 190°C and 210°C for 0, 10, 20, 30, 40, and 50 min, respectively, so as to obtain pre‐treated fibers with cyclization degrees of 0%, 19.96%, 35.18%, 38.92%, 42.80%, and 53.12%, respectively. The pre‐treated fibers were further stabilized in an oxygen atmosphere. The scanning results show that the radial structure difference of oxide fibers first decreases and then increases with cyclization degree increasing. Through FTIR, SEM and Raman characterization, it is found that this phenomenon is mainly related to the influence of nitrogen thermal pretreatment on oxygen diffusion. Therefore, to improve the thermal stability efficiency of PAN fibers by means of nitrogen thermal pre‐treatment, it is necessary to control the degree of cyclisation, and the appropriate degree of cyclisation in the present work is about 35%.Keywords
This publication has 28 references indexed in Scilit:
- Effect of hygrothermal aging on novel hybrid composites: Transforming textile waste into a valuable productPolymer Composites, 2023
- Accelerating the stabilization of polyacrylonitrile fibers by nitrogen pretreatmentJournal of Applied Polymer Science, 2022
- The role of structural evolution of polyacrylonitrile fibers during thermal oxidative stabilization on mechanical propertiesJournal of Applied Polymer Science, 2020
- Structural changes of polyacrylonitrile fibers in the process of wet spinningJournal of Applied Polymer Science, 2020
- Thermal behavior and thermal stabilization of guanidine hydrochloride-modified acrylic fiber for preparation of low-cost carbon fiberJournal of Thermal Analysis and Calorimetry, 2018
- The influence of thermal stabilization stage on the molecular structure of polyacrylonitrile fibers prior to the carbonization stageFibers and Polymers, 2012
- Improving preferred orientation and mechanical properties of PAN-based carbon fibers by pretreating precursor fibers in nitrogenCarbon, 2011
- Raman microspectroscopy of soot and related carbonaceous materials: Spectral analysis and structural informationCarbon, 2005
- Pan-based carbon fibers—present state and trend of the technology from the viewpoint of possibilities and limits to influence and to control the fiber properties by the process parametersCarbon, 1989
- FT‐IR study of the stabilization reaction of polyacrylonitrile in the production of carbon fibersJournal of Polymer Science Part A: Polymer Chemistry, 1986