Statistical analysis of rotary atomization by phase Doppler anemometry
Open Access
- 1 May 2024
- journal article
- research article
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (5)
Abstract
Rotary atomization is used in a wide variety of fields, exploiting the external control option of the spray while no high-pressure fluid is needed. Most papers on rotary atomization deal with liquid jet breakup, while external spray characteristics are rarely evaluated; this is performed currently. The water spray was measured by a two-component phase Doppler anemometer. The optical setup requires a special measurement chamber to avoid spray deposition on the optical components. Therefore, the first goal was to find a proper filter that enables the removal of biased droplets by secondary flows. Since most droplets have a similar radial-to-tangential velocity ratio at each measurement point, i.e., scattering around a line, this was the first component of the best filter. The second component was the need for a positive radial velocity component. This filter efficiently removed droplets originating from alternative processes, increasing the R2 of the line fit. The physical soundness of this filter was checked by evaluating the effect of filtering on the angle of the velocity components of each droplet at a given measurement point. The proposed filter efficiently detected recirculation, a secondary effect of the measurement setup with less regular dataset shapes. Finally, the slope and intercept values of the fitted lines were evaluated and presented. The mean of the former followed the same trend irrespective of the rotational speed and the mass flow rate; it was principally dependent on the radial distance from the atomizer. The intercept showed a regular but less universal behavior.Keywords
Funding Information
- National Research, Development and Innovation Office (OTKA-FK 137758)
- National Research, Development and Innovation Office (TKP2021 BME-NVA-02)
- National Research, Development and Innovation Office (Ú, NKP-23-5-BME-449)
- National Research, Development and Innovation Office (Ú, NKP-23-3-II-BME-405)
- CZECH SCIENCE FUNDATION (21-45227L)
- Brno University of Technology (FSI-S-23-8192)
This publication has 29 references indexed in Scilit:
- Effects of secondary breakup, collision dynamics, gravity and evaporation on droplet size distribution in a pressure-swirl JET A-1 sprayFuel, 2023
- Experimental and numerical analysis of the internal flow of a rotary atomizerChemical Engineering Science, 2022
- Experimental and numerical investigation on evaporation characteristics of high salinity wastewater by rotary sprayDesalination, 2021
- Experimental study on atomization characteristics of high-energy-density fuels using a fuel slingerEnergy, 2021
- Effect of process parameters on dry centrifugal granulation of molten slag by a rotary disk atomizerJournal of Iron and Steel Research International, 2021
- Numerical analysis of fuel injection configuration on nitrogen oxides formation in a jet engine combustion chamberEnergy Conversion and Management, 2020
- Modelling of the breakup process of viscous fluids by a high-speed rotary atomizerExperiments in Fluids, 2018
- Effects of injection pressure difference on droplet size distribution and spray cone angle in spray cooling of liquid nitrogenCryogenics, 2017
- Analysis of formation and breakup mechanisms in rotary atomization through spray visualizationJournal of Visualization, 2011
- Spray characteristics of the rotating fuel injection system of a micro-jet engineJournal of Mechanical Science and Technology, 2010