Improvement of microstructures and properties of copper-aluminium oxide coating by pulse jet electrodeposition
Authors:
- 1 September 2019
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (11) , 115090
Abstract
Cu-Al2O3 nanocomposite coatings were jet electrodeposited using a direct current and pulse current to enhance the quality of the deposition and its mechanical properties. The composite coating prepared with a pulse current exhibited a smooth surface morphology, dense microstructure and good mechanical properties compared with those of the coatings obtained under direct current conditions. The effect of the pulse parameters, including the current density and pulse frequency, on the morphologies, microstructures, grain growth, and properties of the coatings was also examined. The results show that a high pulse frequency and appropriate current density improved the quality of the deposition and its mechanical properties. A dense nanocomposite copper-alumina deposited coating with an average refined grain size of 26 nm was fabricated with a pulse current density of 400 A/dm2 and a pulse frequency of 5000 Hz. The microhardness and tensile strength of the nanocomposite coating attained maximum values of 2.37 GPa and 692 MPa, respectively, when the optimum deposition conditions were used.Keywords
Funding Information
- The National Natural Science Foundation of China (51305178)
- Jiang Su Natural Science Foundation (BK20181473)
- Xuzhou science and technology innovation project (KC19128)
This publication has 29 references indexed in Scilit:
- Characterization of the microstructure and texture of functionally graded nickel-Al2O3 nano composite coating produced by pulse depositionSurface and Coatings Technology, 2013
- Effect of Additive on Microstructure and Property of Bulk Nanocrystalline Co-Ni Alloys Prepared by JEDAdvanced Materials Research, 2011
- Corrosion resistance and mechanical properties of pulse electrodeposited Ni–TiO2 composite coating for sintered NdFeB magnetJournal of Alloys and Compounds, 2009
- Effect of pulse electrodeposition parameters on the properties of Ni/nano-SiC compositesApplied Surface Science, 2008
- The influence of thiourea on copper electrodeposition: Adsorbate identification and effect on electrochemical nucleationThin Solid Films, 2008
- The effects of electrodeposition current density on properties of Ni–CNTs composite coatingsSurface and Coatings Technology, 2008
- Electrocodeposition of Nickel Nanocomposites Using an Impinging Jet ElectrodeJournal of the Electrochemical Society, 2007
- A nanocrystalline grain oriented silicon steel prepared by severe plastic deformationMaterials Science and Engineering: A, 2006
- Fabrication and characterization of electro-codeposited Ni/Zr-silicate composite coatingSurface and Coatings Technology, 2006
- Surface roughening in pulse current and pulse reverse current electroforming of nickelSurface and Coatings Technology, 1997