Analysis of Initial Breakup Mechanism of Diesel Spray Injected into High-Pressure Ambience
Authors:
- 8 March 2004
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The initial breakup process from liquid fuel to spray droplets in the vicinity of the nozzle tip under high-pressure ambience is analyzed for the isothermal diesel spray injected into the optically accessible high-pressure vessel. The spray was observed both by the use of planar laser light and also by using diffused shadow light. The results obtained in the present study are summarized as follows. The initial breakup of the developing diesel spray could be photographed more clearly in the vicinity of the nozzle tip. The initial liquid jet from nozzle hole is divided into two zones; the intact liquid pillar zone and the umbrella-like thin liquid protrusion zone. The breakup happens mainly in the periphery of the thin liquid umbrella protruding from the tip of the intact liquid pillar. The high pressure ambience break-up mechanism can be analyzed from observation of the internal flow of the liquid pillar and it's protrusive umbrella.Keywords
This publication has 21 references indexed in Scilit:
- Improvement of Three-Dimensional Diesel Spray Modeling in Near Region with Coarse MeshSAE International Journal of Advances and Current Practices in Mobility, 2000
- Modeling the Effects of Fuel Spray Characteristics on Diesel Engine Combustion and EmissionSAE International Journal of Advances and Current Practices in Mobility, 1998
- Effect of Nozzle Configurations for Characteristics of Non-Reacting Diesel Fuel SpraySAE International Journal of Advances and Current Practices in Mobility, 1997
- Modeling Atomization and Break Up in High-Pressure Diesel SpraysSAE International Journal of Advances and Current Practices in Mobility, 1997
- Liquid Jet Atomization and Droplet Breakup Modeling of Non-Evaporating Diesel Fuel SpraysSAE International Journal of Advances and Current Practices in Mobility, 1997
- Flow Analysis in Nozzle Hole in Consideration of CavitationSAE International Journal of Advances and Current Practices in Mobility, 1997
- Experiments and Modeling on Spray Distributions in the Combustion Chamber of a Direct Injection Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 1996
- Planar Fluorescence Technique for Visualization of a Diesel SpraySAE International Journal of Advances and Current Practices in Mobility, 1992
- Diesel Spray Structure Investigation by Laser Diffraction and Sheet IlluminationSAE International Journal of Advances and Current Practices in Mobility, 1992
- A Study of the Structure of Diesel Sprays Using 2-D Imaging TechniquesSAE International Journal of Advances and Current Practices in Mobility, 1992