Iron and phosphoric acid co-modified fishbone char for olefin-rich bio-oil production from waste agricultural films via microwave-assisted pyrolysis

Authors:

Abstract
Microwave-assisted catalytic pyrolysis offers an efficient route for converting waste plastics into liquid fuels, addressing both petroleum resource scarcity and environmental pollution. However, achieving high oil yields and targeted product selectivity requires careful optimization of catalyst design and operating conditions. In this work, a series of acid–metal bifunctional catalysts was synthesized via phosphoric acid modification and iron loading, and their effects on plastic pyrolysis behavior were systematically investigated. Among them, 20Fe–30P@FC exhibited outstanding catalytic performance, delivering a bio-oil yield as high as 89.32 wt.%. The resulting bio-oil was dominated by olefins (84.03%), with minor fractions of alkenes (8.98%) and aromatics (4.80%). Further catalyst screening over a wide range of phosphoric acid contents (0 wt.%–40 wt.%) and iron loadings (0 wt.%–30 wt.%) confirmed the superior performance of 20Fe–30P@FC in terms of both oil yield and product distribution. Process optimization revealed that the highest bio-oil yield and optimal oil quality were achieved at a pyrolysis temperature of 550 °C, a catalytic temperature of 350 °C, and a catalyst-to-feedstock ratio of 1:2. Regeneration experiments demonstrated stable catalytic activity over multiple cycles, indicating the robustness of 20Fe–30P@FC for microwave-assisted catalytic pyrolysis of plastic mulch. Overall, this study presents a viable strategy for the targeted catalytic conversion and high-value utilization of waste plastics, including ground film plastics.

This publication has 73 references indexed in Scilit: