MATHEMATICAL MODELING FOR FIXED-BED DRYING CONSIDERING HEAT AND MASS TRANSFER AND INTERFACIAL PHENOMENA
- 31 January 2001
- journal article
- Published by Taylor & Francis in Drying Technology
- Vol. 19 (1) , 137-154
Abstract
A mathematical model for fixed-bed drying with air cross-flow was obtained to simulate the drying process. Special attention was placed on the interfacial conditions. A system of four couple nonlineal partial differential equations in conjunction with three nonlineal algebraic equations was applied and solved numerically by both finite differences and Runge–Kutta methods. Simulations were compared with experimental data from carrot slabs in deep fixed-bed drying. Slab thicknesses were 1.0 and 0.1 cm, and air drying temperatures were 50–60°C. Simulation predicted that water transport was controlled by internal diffusion in slabs with 1.0 cm of thickness; therefore, the interfacial conditions may be considered in steady state. Nevertheless, the predominant phenomenon in slabs with 0.1 cm of thickness was by convection; therefore, the interfacial conditions varied with respect to space and time. In the proposed phenomenological representation of fixed-bed drying, the properties and variables of the system defined the type of mechanism controlling of the drying process without previous assumptions.Keywords
This publication has 10 references indexed in Scilit:
- Analytical solution of mass transfer equation considering shrinkage for modeling food-drying kineticsJournal of Food Engineering, 2000
- MATHEMATICAL MODELING OF CONTINUOUS DRYERS USING THE HEAT AND MASS TRANSFER PROPERTIES AND PRODUCT-AIR EQUILIBRIUM RELATIONDrying Technology, 2000
- DESIGN OF BATCH GRAPE DRYERSDrying Technology, 1998
- Moisture Diffusivity Data Compilation in FoodstuffsDrying Technology, 1996
- Cross-Flow Drying of Wheat. A Simulation Program with a Diffusion-Based Deep-Bed Model and a Kinetic Equation for Viability Loss Estimations.Drying Technology, 1996
- DETERMINATION of HEAT TRANSFER COEFFICIENTS DURING DRYING of FOODSTUFFSJournal of Food Process Engineering, 1995
- Simulation of packed bed drying of foodstuffs with airflow reversalJournal of Food Engineering, 1995
- MODELING OF WATER ACTIVITY AND ENTHALPY OF WATER SORPTION IN CASSAVA CHIPSDrying Technology, 1994
- Food Process Engineering1975
- A mathematical simulation of grain dryingJournal of Agricultural Engineering Research, 1969