The Performance of Polymer Flooding in Heterogeneous Type II Reservoirs—An Experimental and Field Investigation
Open Access
Abstract
The polymer flooding process has already been applied to the medium permeability type II reservoirs of the Daqing Oilfield (China) to enhance oil recovery. However, this process faces a number of challenges, such as the flooding efficiency, high injection pressure, formation blockage and damage, unbalanced absorption ratio, and economical justification. In this study, single-phase and two-phase flow experiments are performed to investigate polymer injection adaptability with natural cores of type II reservoirs. The enhanced oil recovery (EOR) effects of the polymer are studied by physical simulation experiments, and the results of application in an actual field are also presented. The results indicate that the flow characteristics and injection capability are dominated by the reservoir permeability in polymer flooding. Moreover, the adsorption of polymer molecules and the injection pressure gradient, which reflect formation damage, are affected more significantly by the concentration than by the molecular weight in type II reservoirs. Using the matching relationship, the injection-production process is stable, and additional oil recoveries of 10%–15% can be obtained in heterogeneous type II reservoirs with a high water saturation. This work is significant in that it further accelerates the application of polymer flooding EOR in medium permeability heterogeneous oilfields with high water saturation.Keywords
Funding Information
- National Natural Science Funds for Young Scholars of China (51604079)
- University Nursing Program for Young Scholars with Creative Talents in Heilongjiang Province
This publication has 41 references indexed in Scilit:
- Evaluation of CO2 Storage Mechanisms in CO2 Enhanced Oil Recovery Sites: Application to Morrow Sandstone ReservoirEnergy & Fuels, 2016
- Co‐optimization of CO2‐EOR and storage processes in mature oil reservoirsGreenhouse Gases: Science and Technology, 2016
- Uncertainty analysis of carbon sequestration in an active CO2-EOR fieldInternational Journal of Greenhouse Gas Control, 2016
- CO2 Accounting and Risk Analysis for CO2 Sequestration at Enhanced Oil Recovery SitesEnvironmental Science & Technology, 2016
- A fully coupled thermal-hydrological-mechanical-chemical model for CO2 geological sequestrationJournal of Natural Gas Science and Engineering, 2016
- Status of Polymer-Flooding TechnologyJournal of Canadian Petroleum Technology, 2015
- Pre-site Characterization Risk Analysis for Commercial-Scale Carbon SequestrationEnvironmental Science & Technology, 2014
- An Integrated Framework for Optimizing CO2 Sequestration and Enhanced Oil RecoveryEnvironmental Science & Technology Letters, 2013
- Enhanced Oil Recovery (EOR) by Combined Low Salinity Water/Polymer FloodingEnergy & Fuels, 2013
- Prediction of critical oil rate for bottom water coning in anisotropic and homogeneous formationsJournal of Petroleum Science and Engineering, 2012