Study on Microstructure and Properties of Bimodal Structured Ultrafine-Grained Ferrite Steel
Open Access
Abstract
The objective of the study research was to obtain bimodal structured ultrafine-grained ferrite steel with outstanding mechanical properties and excellent corrosion resistance. The bimodal microstructure was fabricated by the cold rolling and annealing process of a dual-phase steel. The influences of the annealing process on microstructure evolution and the mechanical properties of the cold-rolled dual-phase steel were investigated. The effect of bimodal microstructure on corrosion resistance was also studied. The results showed that the bimodal characteristic of ferrite steel was most apparent in cold-rolled samples annealed at 650 °C for 40 min. More importantly, due to the coordinated action of fine-grained strengthening, back-stress strengthening, and precipitation strengthening, the yield strength (517 MPa) of the bimodal microstructure improved significantly, while the total elongation remained at a high level of 26%. The results of corrosion experiments showed that the corrosion resistance of bimodal ferrite steel was better than that of dual-phase steel with the same composition. This was mainly because the Volta potential difference of bimodal ferrite steel was smaller than that of dual-phase steel, which was conducive to forming a protective rust layer.Keywords
Funding Information
- National Natural Science Foundation of China (51474031)
This publication has 39 references indexed in Scilit:
- Grain Refinement Mechanism of the As-Cast and As-Extruded Mg–14Li Alloys with Al or Sn AdditionMetals, 2017
- Mechanical properties, formability and corrosion resistance of thermomechanically controlled processed Ti-Nb stabilized IF steelMaterials Science and Engineering: A, 2017
- Effect of deformation conditions on the corrosion behavior of the low alloy structural steel girdersMaterials & Design, 2016
- Development of Nanocrystalline 304L Stainless Steel by Large Strain Cold WorkingMetals, 2015
- Influence of Inclusion on Corrosion Behavior of E36 Grade Low-Alloy Steel in Cargo Oil Tank Bottom Plate EnvironmentJournal of Iron and Steel Research International, 2014
- Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwinsNature Communications, 2014
- Corrosion behavior of each phase in low carbon microalloyed ferrite–bainite dual-phase steel: Experiments and modelingCorrosion Science, 2013
- Influence of grain size and texture on Hall–Petch relationship for a magnesium alloyScripta Materialia, 2011
- Electrochemical corrosion behaviour of a Ti‐IF steel and a SAE 1020 steel in a 0.5 M NaCl solutionMaterials and Corrosion, 2010
- Relationship between yield strength and grain size for a bimodal structural ultrafine-grained ferrite/cementite steelScripta Materialia, 2007