Computer-controlled apparatus for internal friction and Young’s modulus measurements as a function of temperature
Authors:
- 1 December 1996
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 67 (12) , 4240-4245
Abstract
A mechanical resonance apparatus has been developed which allows automatic recording of internal friction Q−1and dynamic Young’s modulus E as a function of temperature. The attainable accuracies ΔQ−1/Q−1 and ΔE/E are approximately equal to 3.5×10−2 and 1×10−5, respectively. The vibrating sample is kept at resonance, during heating and cooling, by continuously readjusting the frequency of the driving signal supplied by a computer‐controlled frequency synthesizer. The frequency regulation is obtained by keeping either the amplitude of the response signal at its maximum level or the phase difference between the excitation and vibration signals at a fixed, selected value. In comparison with previous automatic control systems designed for similar applications, the one described here is more versatile, being able to measure internal friction from the width of the resonance curve as well as from the logarithmic decrement of freely decaying vibrations, and being able to regulate the vibration frequency by either the amplitude or the phase control method. The two automatically interchangeable measuring procedures allow recording over wide ranges of the dissipation coefficient (10−5≤Q−1≤10−2),while the two frequency regulation methods permit, according to the requirements, either higher data acquisition rates (phase control approach) or better accuracies (amplitude control approach). Tests carried out on a CuZnAl alloy show good performance of the apparatus during temperature‐induced martensitic transitions, which are associated with large relative changes of frequency and energy dissipation.Keywords
This publication has 6 references indexed in Scilit:
- Non-linear elastic properties of CuZnAl alloys near martensitic transformationJournal of Alloys and Compounds, 1994
- Absence of asymptotic-time symmetry breaking in a symmetric double-well model of the H-bond with damped stretching modeJournal de Physique I, 1991
- Apparatus for dynamic and static measurements of mechanical properties of solids and of flux-lattice in type-II superconductors at low frequency (10−5–10 Hz) and temperature (4.7–500 K)Review of Scientific Instruments, 1990
- Torsional oscillator for internal friction data at 100 kHzReview of Scientific Instruments, 1989
- Method for accurate resonant frequency measurements with a phase-modulated feedback loopReview of Scientific Instruments, 1987
- Apparatus for the measurement of internal friction as a function of frequency between 10−5 and 10 HzReview of Scientific Instruments, 1977