Adaptive Amplifier for a Test Vehicle Moving Over Bridges: Theoretical Study
Authors:
- 29 December 2020
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 21 (03)
Abstract
A vibration amplifier is first proposed for adding to a test vehicle to enhance its capability to detect frequencies of the bridge under scanning. The test vehicle adopted is of single-axle and modeled as a single degree-of-freedom (DOF) system, which was proved to be successful in previous studies. The amplifier is also modeled as a single-DOF system, and the bridge as a simple beam of the Bernoulli–Euler type. To unveil the mechanism involved, closed-form solutions were first derived for the dynamic responses of each component, together with the transmissibility from the vehicle to amplifier. Also presented is a conceptual design for the amplifier. The approximations adopted in the theory were verified to be acceptable by the finite element simulation without such approximations. Since road roughness can never be avoided in practice and the test vehicle has to be towed by a tractor in the field test, both road roughness and the tractor are included in the numerical studies. For the general case, when the amplifier is not tuned to the vehicle frequency, the bridge frequencies can better be identified from the amplifier than vehicle response, and the tractor is helpful in enhancing the overall performance of the amplifier. Besides, the amplifier can be adaptively adjusted to target and detect the bridge frequency of concern. For the special case when the amplifier is tuned to the vehicle frequency, the amplifier can improve the vehicle performance by serving as a tuned mass damper, as conventionally known. This case is of limited use since it does not allow us to target the bridge frequencies. Both bridge damping and vehicle speed are also assessed with their effects addressed.Keywords
This publication has 29 references indexed in Scilit:
- Two-axle test vehicle for damage detection for railway tracks modeled as simply supported beams with elastic foundationEngineering Structures, 2020
- State-of-the-Art of Vehicle-Based Methods for Detecting Various Properties of Highway Bridges and Railway TracksInternational Journal of Structural Stability and Dynamics, 2020
- Track modulus detection by vehicle scanning methodActa Mechanica, 2020
- Measuring bridge frequencies by a test vehicle in non-moving and moving statesEngineering Structures, 2020
- Vehicle Scanning Method for Bridges2019
- Drive-by scour monitoring of railway bridges using a wavelet-based approachEngineering Structures, 2019
- Detection of damaged supports under railway track based on frequency shiftJournal of Sound and Vibration, 2017
- Experimental Verification of Indirect Bridge Frequency Measurement Using a Passing VehicleProcedia Engineering, 2017
- Use of a passing vehicle to scan the fundamental bridge frequencies: An experimental verificationEngineering Structures, 2005
- Extracting bridge frequencies from the dynamic response of a passing vehicleJournal of Sound and Vibration, 2004