A 2D Proof of Principle Towards a 3D Digital SiPM in HV CMOS With Low Output Capacitance
- 21 June 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 63 (4) , 2293-2299
Abstract
The 3D vertical integration of SPAD and readout electronics is a promising avenue to high performance photodetectors. This approach will minimize most limitations of current SiPM and lead to better performances in terms of effective PDE, timing and added functionalities. In this paper, we present a new integrated digital SiPM electronic architecture. This specific architecture aims to replace conventional analog SiPM with the added benefits of a significantly lower and constant output capacitance as well as immunity to SPAD to SPAD gain variation on the single photon resolution while providing an analog-like output signal waveform representing the sum of all triggered SPADs. This electronic architecture also offers options to turn off noisy SPADs, to reduce afterpulsing through a programmable hold-off time and to adjust the dynamic range of the output depending on the photon flux. While the 3D integration process development is underway, we realized a 2D version as a proof of principle of the electronic architecture. The 2D detector presented in this article is composed of an array of 242 pixels for a size of 1.1 × 1.1 mm 2 . The output capacitance of the device is 5.6 pF/mm 2 , the timing jitter associated to the quenching circuit is about 40 ps FWHM and the maximum timing skew within the array is about 70 ps, which could still be optimized.Keywords
Funding Information
- Fonds de Recherche du Quebec-Nature et Technologies (FRQNT)
- Natural Sciences and Engineering Research Council of Canada (NSERC)
- Regroupement stratégique en microsystèmes du Québec (ReSMiQ)
- Institut interdisciplinaire d’innovation technologique (3IT)
- CMC Microsystems
This publication has 35 references indexed in Scilit:
- Advances in Multi-Pixel Photon Counter technology: First characterization resultsNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2016
- Analysis of transit time spread on FBK silicon photomultipliersJournal of Instrumentation, 2015
- Implementation Study of Single Photon Avalanche Diodes (SPAD) in $0.8~\mu\hbox{m}$ HV CMOS TechnologyIEEE Transactions on Nuclear Science, 2015
- NUV Silicon Photomultipliers With High Detection Efficiency and Reduced Delayed Correlated-NoiseIEEE Transactions on Nuclear Science, 2015
- Planar CMOS analog SiPMs: design, modeling, and characterizationJournal of Modern Optics, 2015
- 11.4 A 67,392-SPAD PVTB-compensated multi-channel digital SiPM with 432 column-parallel 48ps 17b TDCs for endoscopic time-of-flight PET2015
- Characterization of the First FBK High-Density Cell Silicon Photomultiplier TechnologyIEEE Transactions on Electron Devices, 2013
- A Time-Resolved, Low-Noise Single-Photon Image Sensor Fabricated in Deep-Submicron CMOS TechnologyIEEE Journal of Solid-State Circuits, 2012
- Characterization and simulation of the response of Multi-Pixel Photon Counters to low light levelsNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2011
- Features of Silicon Photo Multipliers: Precision Measurements of Noise, Cross-Talk, Afterpulsing, Detection EfficiencyIEEE Transactions on Nuclear Science, 2009