An Automated Seepage Meter for Streams and Lakes
Open Access
- 14 April 2020
- journal article
- research article
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 56 (4)
Abstract
We describe a new automatic seepage meter for use in soft bottom streams and lakes. The meter utilizes a thin‐walled tube that is inserted into the streambed or lakebed. A hole in the side of the tube is fitted with an electric valve. Prior to the test, the valve is open and the water level inside the tube is the same as the water level outside the tube. The test starts with closure of the valve, and the water level inside the tube changes as it moves toward the equilibrium hydraulic head that exists at the bottom of the tube. The time rate of change of the water level immediately after the valve closes is a direct measure of the seepage rate (q). The meter utilizes a precision linear actuator and a conductance circuit to sense the water level to a precision of about ±0.1 mm. The meter can also provide an estimate of vertical hydraulic conductivity (K v ) if data are collected for a characteristic time. The detection limit for q depends on the vertical hydraulic head gradient. For K v = 1 m/day, q of about 2 mm/day can be measured. Results from a laboratory sand tank show excellent agreement between measured and true q, and results from a field site are similar to values from calculations based on independent measurements of K v and vertical head gradients. The meter can provide rapid (30 min) q measurements for both gaining and losing systems and complements other methods for quantifying surface water groundwater interactions.Keywords
Funding Information
- National Science Foundation (EAR‐1744721)
This publication has 42 references indexed in Scilit:
- An alternative to traditional seepage meters: Dye displacementWater Resources Research, 2011
- Comparison of Darcian flux calculations and seepage meter measurements in a sandy streambed in North Carolina, United StatesWater Resources Research, 2010
- Estimation of seepage rates in a losing stream by means of fiber-optic high-resolution vertical temperature profilingJournal of Hydrology, 2010
- Spatial and temporal variability of streambed hydraulic conductivity in West Bear Creek, North Carolina, USAJournal of Hydrology, 2008
- A seepage meter designed for use in flowing waterJournal of Hydrology, 2008
- Effects of hyporheic processes on streambed vertical hydraulic conductivity in three rivers of NebraskaGeophysical Research Letters, 2007
- Factors affecting the performance of conventional seepage metersWater Resources Research, 2003
- Interaction between stream temperature, streamflow, and groundwater exchanges in alpine streamsWater Resources Research, 1998
- Evaluating the Reliability of the Stream Tracer Approach to Characterize Stream‐Subsurface Water ExchangeWater Resources Research, 1996
- Effect of partial penetration on flow in unconfined aquifers considering delayed gravity responseWater Resources Research, 1974