Abstract
The sixth generation of wireless fidelity (Wi-Fi 6) spectrums possess two unbalanced bands of 2.4~2.5 GHz (4.1%) and 5.15~5.85 GHz (12.7%). Most of the existing dual-band Wi-Fi 6 patch antennas are either with a superfluous lower or an insufficient higher bandwidth. It remains a challenge to cover these two bands with an exact way. This paper addresses the issue of the exact coverage problem of the unbalanced Wi-Fi 6 bands by engineering the TM0.5,0 and TM0.5,1 modes of the half-mode patch while maintaining a very small volume. The design guideline follows three steps: first, select proper patch size to make the first two modes resonate at 2.45 GHz and 5.5 GHz using two ports. Second, optimize feeding positions to make both impedance trajectories in Smith Chart with minimum sizes. Third, use lumped components to make the two resonances with good matching condition. Using the novel matching method, the resultant half-mode patch with a profile of 3 mm (0.024λL/0.052λH) and size of 22.55×23.95 mm2 (0.18×0.19λL2/0.39×0.41λH2) exactly covers the Wi-Fi 6 bands, indicating that the antenna space is taken up fully. As far as authors know, the proposed antenna is with the smallest volume compared to all the reported Wi-Fi 6 dual-band patch antennas. Moreover, the proposed antenna is with dual port and aperture sharing properties, which suits the optimal Wi-Fi 6 radio frequency front-end architecture.
Funding Information
  • Key Research and Development Project of Shaanxi Province (Grant 2022GY-095)
  • High-Level Innovation Talent Project Imported by QinChuangYuan of Shaanxi Province (QCYRCXM-2022-33)
  • Shaanxi Key Laboratory of Deep Space Exploration Intelligent Information Technology (2021SYS-04)
  • National Natural Science Foundation of China (62101427, U22BB2016)

This publication has 29 references indexed in Scilit: