Comparative Study of Mechanical Properties and Thermal Stability on Banyan/Ramie Fiber‐Reinforced Hybrid Polymer Composite
Open Access
- 1 January 2021
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2021 (1)
Abstract
The usage of natural fibers has increased recently. They are used to replace synthetic fiber products in aircraft and automobile industries. In this study, natural fibers of bidirectional banyan mat and ramie fabrics are used for reinforcement, and the matrix is an epoxy resin to fabricate composite laminates by traditional hand layup technique at atmospheric temperature mode. Five different sequences of reinforcements are as follows to quantify the effect of thermal stability and mechanical behavior of silane‐treated and untreated hybrid composites. The results revealed that silane‐treated fabric composite laminates were given enhanced mechanical properties of 7% tensile, 11% flexural, and 9% impact strength compared with untreated fabric composite, and at the same time when the increasing of ramie fabric was given the positive influence of 41% improved tensile strength of 40.7 MPa, 49% improved in flexural strength of 38.9 MPa and negative influence in 57% lower impact strength in sample E and positive value in sample A 21.12 J impact energy absorbed in the hybrid composite. Thermogravimetric analysis (TGA) revealed the thermal stability of the hybrid composite. In sample A, the thermal stability is more than in other samples, and 410°C is required to reduce the mass loss of 25%. The working mass condition of the hybrid composite is up to 3.25 g after it moves to degrade.Keywords
This publication has 28 references indexed in Scilit:
- Natural hemp fiber reinforced polybenzoxazine composites: Curing behavior, mechanical and thermal propertiesComposites Science and Technology, 2017
- A review on physico-mechanical properties of bast fibre reinforced polymer compositesJournal of Building Engineering, 2017
- Long-term tensile properties of natural fibre-reinforced polymer composites: Comparison of flax and glass fibresComposites Part B: Engineering, 2016
- Effect of alkali treatment on microstructure and mechanical properties of coir fibres, coir fibre reinforced-polymer composites and reinforced-cementitious compositesConstruction and Building Materials, 2016
- The Effects of Orientation on the Mechanical and Morphological Properties of Woven Kenaf-reinforced Poly Vinyl Butyral FilmBioResources, 2015
- Thermal, thermo oxidative and ablative behavior of cenosphere filled ceramic/phenolic compositesPolymer Degradation and Stability, 2015
- Mechanical, ablative, and thermal properties of cenosphere‐filled ceramic/phenolic compositesPolymer Composites, 2015
- Effect of surface treatments on interfacial properties of flax fiber-reinforced compositesAdvanced Composite Materials, 2013
- Thermal conductivity Characterization of Bamboo fiber reinforced in Epoxy ResinIOSR Journal of Mechanical and Civil Engineering, 2013
- Woven hybrid biocomposites: Dynamic mechanical and thermal propertiesComposites Part A: Applied Science and Manufacturing, 2012