Tensile Properties of Single Jersey and 1×1 Rib Knitted Fabrics Made from 100% Cotton and Cotton/Lycra Yarns
Open Access
- 25 October 2017
- journal article
- research article
- Published by Wiley in Journal of Engineering
- Vol. 2017, 1-7
Abstract
The tensile properties such as tensile strength which is measured as breaking force in Newton (N) and elongation percent (%) at break of single jersey and 1×1 rib (knitted with full needles) knitted fabrics made from 100% cotton and cotton/Lycra yarns (5% Lycra yarn content in 95% combed cotton yarn) are investigated in this research. The sample fabrics are conditioned for 24 hours at°C temperature and% relative humidity before testing. Ten specimens (five for lengthwise and five for widthwise) have been taken from each of the two knitted structures, those made from 100% cotton and cotton/Lycra (at 95/5 percent ratio blend) yarns. According to the discussion and as found from the investigations, the tensile properties of single jersey and 1×1 rib knitted fabrics made from 100% cotton and cotton/Lycra yarns are significantly different from each other and both of the knitted fabrics have high elongation percent at break with cotton/Lycra blend yarns as compared to 100% cotton yarn. Knitted fabrics made from cotton/Lycra blended yarn have low breaking force and high elongation percent at break relative to knitted fabrics made from 100% cotton yarns.
Keywords
This publication has 9 references indexed in Scilit:
- A Comparative Strength Analysis of Denim Fabrics Made from Core-Spun Yarns Containing Textured MicrofilamentsJournal of Engineered Fibers and Fabrics, 2017
- Effect of Lycra Percentages and Loop Length on the Physical and Mechanical Properties of Single Jersey Knitted FabricsJournal of Composites, 2016
- Research Regarding the Influence of Raw Material and Knitted Fabric Geometry on the Tensile Strength and Breaking ElongationProcedia Technology, 2016
- Mechanical Properties of Weft Knitted Fabrics in Fully Stretched Status along Courses Direction: Geometrical Model AspectUniversal Journal of Mechanical Engineering, 2013
- Effect of Lycra Extension Percent on Single Jersey Knitted Fabric PropertiesJournal of Engineered Fibers and Fabrics, 2012
- Modelling and experimental verification of mechanical properties of cotton knitted fabric composites; pp. 39–50Estonian Journal of Engineering, 2011
- The Poisson Ratio and Modulus of Elastic Knitted FabricsTextile Research Journal, 2010
- The effect of tuck stitches on the mechanical performance of knitted fabric reinforced compositesComposite Structures, 2009
- Finite element modelling of composite materials and structures F.L. Matthewset al. Woodhead Publishing, Abington Hall, Abington, Cambridge CB1 6AH, UK. 2000. 214pp. Illustrated. £95. ISBN 1-85573-422-2The Aeronautical Journal, 2001