Residual Stress Formation Mechanisms in Laser Powder Bed Fusion—A Numerical Evaluation
Open Access
Abstract
Additive manufacturing methods, such as the laser powder bed fusion, do not need any special tool or casting mold. This enables the fast realization of complex and individual geometries with integrated functions. However, the local heat input during the manufacturing process often leads to residual stresses and distortion. This in turn causes poor quality, scrap parts or can even terminate a job prematurely if the powder recoating mechanism collides with a distorted part during the process. This study investigates the generation mechanisms of residual stresses and distortion during laser powder bed fusion (LPBF) of stainless steel 316L in order to reduce these effects and thus contribute to improved process safety and efficiency. Therefore, numerical investigations with a finite element model on the scale of a few melt tracks and layers serve to develop a detailed understanding of the mechanisms during production. The work includes an investigation of the build plate temperature, the laser power and speed and the layer thickness. The results show a strong dependency on the build plate preheating and energy per unit length. A higher build plate temperature and a reduction of the energy per unit length both lead to lower residual stresses.Keywords
Funding Information
- German Research Foundation (DFG) grant “Open Access Publication Funding/2023-2024/University of Stuttgart” (512689491)
This publication has 32 references indexed in Scilit:
- Finite Element Simulation of Selective Laser Melting process considering Optical Penetration Depth of laser in powder bedMaterials & Design, 2016
- Temperature distribution and melt geometry in laser and electron-beam melting processes – A comparison among common materialsAdditive Manufacturing, 2015
- An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless SteelMetallurgical and Materials Transactions A, 2014
- Modeling metal deposition in heat transfer analyses of additive manufacturing processesFinite Elements in Analysis and Design, 2014
- Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser meltingMaterials & Design (1980-2015), 2013
- Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser meltingJournal of Laser Applications, 2013
- From Powders to Dense Metal Parts: Characterization of a Commercial AlSiMg Alloy Processed through Direct Metal Laser SinteringMaterials, 2013
- 3D Finite Element Analysis in the selective laser melting processInternational Journal of Simulation Modelling, 2011
- A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturingInternational Journal of Machine Tools and Manufacture, 2009
- Residual stresses in selective laser sintering and selective laser meltingRapid Prototyping Journal, 2006