Chlorinated polyethylene modification of blends derived from waste plastics. Part II: Mechanism of modification
Authors:
- 1 July 1973
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 13 (4) , 308-318
Abstract
Previous publications have shown that the stress‐strain behavior, especially ductility, of some incompatible polymer blends are greatly improved by the addition of slurry produced chlorinated polyethylenes (CPE). This improvement is greatest for blends containing polyethylene and PVC. The most effective CPE's have some residual polyethylene crystallinity and may be described as block‐like polymers with ethylene sequences and chlorine containing sequences. It is postulated that CPE addition improves the blend properties by increasing the adhesion between domains in the blend via interactions with the blend components. This hypothesis was explored by thermal analysis, dynamic mechanical testing, adhesion studies, and microscopy. It is concluded that the interaction of CPE with polyethylene derives from compatibility of rather long methylene sequences in CPE with the polyethylene which results in good adhesive bonding. The interaction of CPE with PVC may not be owing to segmental compatibility but simply good mutual adhesion between similar polar materials. There is no interaction or adhesion between CPE and polystyrene as would be expected. CPE addition to blends is accompanied by a decrease in component domain size. The relationship between CPE structure and its effectiveness as a blend modifier is discussed.Keywords
This publication has 15 references indexed in Scilit:
- Chlorinated polyethylene modification of blends derived from waste plastics Part I: Mechanical behaviorPolymer Engineering & Science, 1973
- The potential for reuse of plastics recovered from solid wastesPolymer Engineering & Science, 1972
- Structure‐property relationships of chlorinated polyethylenesPolymer Engineering & Science, 1972
- Halogenation of polyethylene. II. A comparison of single crystals with nascent polymerJournal of Polymer Science Part B: Polymer Letters, 1971
- Heat of fusion of polyethyleneJournal of Polymer Science Part A-2: Polymer Physics, 1967
- Two‐phase polymer systemsPolymer Engineering & Science, 1967
- Die Einfriertemperatur des PolyäthylensColloid and Polymer Science, 1964
- The Relation of Transition Temperatures to Chemical Structure in High PolymersRubber Chemistry and Technology, 1963
- Effect of branching on dynamic mechanical properties of polyethyleneJournal of Polymer Science, 1956
- Mechanische Relaxationserscheinungen an HochpolymerenColloid and Polymer Science, 1953