Microstructure and Crystallographic Features of Martensite Transformed from Ultrafine-Grained Austenite in Fe–24Ni–0.3C Alloy
- 1 January 2012
- journal article
- Published by Japan Institute of Metals in MATERIALS TRANSACTIONS
- Vol. 53 (1) , 81-86
Abstract
We studied microstructure and crystallographic features, especially orientation relationship, of martensite transformed from austenite with mean grain sizes ranging from 35 µm to 750 nm in an Fe–24Ni–0.3C alloy. The austenite structures with ultrafine or fine grains were fabricated through intense straining by accumulative roll-bonding process and subsequent annealing. The morphology of martensite transformed from the austenite with various grain sizes was all lenticular type. On the other hand, the martensite plate size decreased with the decrease in the austenite grain size. The orientation relationship of martensite transformed from coarse-grained austenite with mean grain size (d) of 35 µm changed depending on the location within martensite plate: i.e., it was Greninger–Troiano relationship at the center part of each martensite plate, while it changed to Kurdjumov–Sachs relationship near the interphase boundary. In contrast, the whole area of each martensite plate, transformed from fine-grained austenite (d = 2.5 µm) and ultrafine-grained austenite (d = 750 nm), satisfied Greninger–Troiano relationship. Furthermore, high density of dislocations and low angle boundaries within the ultrafine-grained austenite resulted in a large scatter of observed orientation relationshipKeywords
This publication has 22 references indexed in Scilit:
- Enhanced structural refinement by combining phase transformation and plastic deformation in steelsScripta Materialia, 2009
- Hardening by Annealing and Softening by Deformation in Nanostructured MetalsScience, 2006
- Nanostructuring of metals by severe plastic deformation for advanced propertiesNature Materials, 2004
- ARB (Accumulative Roll‐Bonding) and other new Techniques to Produce Bulk Ultrafine Grained MaterialsAdvanced Engineering Materials, 2003
- Bulk nanostructured materials from severe plastic deformationProgress in Materials Science, 2000
- Ultra-fine grained bulk steel produced by accumulative roll-bonding (ARB) processScripta Materialia, 1999
- Structure and phase transformation of nano-scale particles of Fe-Ni alloysMaterials Science and Engineering: A, 1996
- Significance of Microstructural Control for Superplastic Deformation and FormingMaterials Transactions, JIM, 1996
- Materials processing by simple shearMaterials Science and Engineering: A, 1995
- Structure and properties of ultrafine-grained materials produced by severe plastic deformationMaterials Science and Engineering: A, 1993