Parametric Study of Wire-EDM Process in Al-Mg-MoS2 Composite Using NSGA-II and MOPSO Algorithms
Open Access
Abstract
Al-Mg-based composite is used in producing a variety of components. To improve the machinability of the composite, MoS2 is added. For characterizing the machining of the Al-Mg-based composite, different wt.% (2, 4, and 6) of MoS2 are added as reinforcement. Wire Electrical Discharge Machining (WEDM) process is performed to analyze the kerf width and surface roughness. Due to the complex nature of the WEDM process, the necessity for its optimization through the use of innovative methods is well-proven in the process of research. Evolutionary algorithms, specifically genetic algorithm based on NSGA-II and Multiple Objective Particle Swarm Optimization (MOPSO), are used for optimizing kerf width and surface roughness. For assessing the impact of current, pulse on time, and gap voltage on kerf width and surface roughness, an analysis of the selected WEDM process parameters is performed. MOPSO takes lesser iterations as compared to NSGA-II in giving nearly the same optimal fronts for achieving low kerf width and surface roughness. The 10–12 A of current, 50–57 µs of pulse on time, and 30–33 V of gap voltage are used for the WEDM process based on the Pareto-optimal solutions and better performance is achieved on the samples. In addition, the supplementary DOE method is applied to determine the relationship between factors affecting a process and the response. The analysis revealed that current has played a major part in the governance of kerf width and surface roughness over pulse on time and gap voltage for Al-Mg-MoS2 composite.Keywords
Funding Information
- Agentúra Ministerstva Školstva, Vedy, Výskumu a Športu SR (025TUKE-4/2020)
This publication has 28 references indexed in Scilit:
- Multi-Objective Optimization of 3D-Surface Topography of Machining YG15 in WEDMMaterials and Manufacturing Processes, 2014
- Experimental investigation, intelligent modeling and multi-characteristics optimization of dry WEDM process of Al–SiC metal matrix compositeJournal of Manufacturing Processes, 2013
- Multi-objective optimization of material removal rate and surface roughness in wire electrical discharge turningThe International Journal of Advanced Manufacturing Technology, 2012
- Modelling and multi-objective optimization of process parameters of wire electrical discharge machining using non-dominated sorting genetic algorithm-IIProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2012
- A feasibility approach by simulated annealing on optimization of micro-wire electric discharge machining parametersThe International Journal of Advanced Manufacturing Technology, 2012
- Multi-objective parametric optimization on machining with wire electric discharge machiningThe International Journal of Advanced Manufacturing Technology, 2011
- Relationship of Surface Roughness with Current and Voltage During Wire EDMJournal of Applied Sciences, 2006
- A fast and elitist multiobjective genetic algorithm: NSGA-IIIEEE Transactions on Evolutionary Computation, 2002
- An application of Taguchi’s robust experimental design technique to improve service performanceInternational Journal of Quality & Reliability Management, 1996
- Application of Taguchi method for process enhancement of on-line consolidation techniqueComposites, 1995