Influence of Anodizing Parameters on the Morphological Characteristics of TNTAs
Authors:
Open Access
- 22 December 2023
- journal article
- research article
- Published by Universiti Malaysia Pahang Al-Sultan Abdullah Press (UMPSA Press) in CONSTRUCTION
- Vol. 3 (2) , 230-240
Abstract
TiO2 nanotubes arrays (TNTAs) were synthesized using the anodization method in ethylene glycol (EG)-based electrolyte with different percentages of ammonium fluoride (0.3, 0.4, and 0.5 wt.%) and water content (2.5, 5, and 7.5% vol%). All the samples were ultrasonically cleaned in acetone, ethanol, and deionized water, then dried in air and kept in an etching solution for a while before anodization. The two-step anodization was carried out, followed by thermal treatment at 450°C for the crystallization. The nanotube samples were characterized using FE-SEM analysis. The FE-SEM results showed that the largest tube diameter was 87.74±1.89 nm of the TNTAs prepared in the EG electrolyte with a composition of 7.5% water content and 0.5% ammonium fluoride. The longest tube length analyzed was around 5.3 µm of the TNTAs prepared in the ethylene glycol electrolyte with the composition of 2.5% water content and 0.4% ammonium fluoride percentage, exhibiting a highly ordered, compact honeycomb structure and thick single-walled structure.Keywords
This publication has 24 references indexed in Scilit:
- The synthesis, surface analysis, and cellular response of titania and titanium oxynitride nanotube arrays prepared on TiAl6V4 for potential biomedical applicationsJournal of Materials Research and Technology, 2023
- Recent progress in TiO2-Based photocatalysts for conversion of CO2 to hydrocarbon fuels: A systematic reviewResults in Engineering, 2022
- Self-organized TiO2 nanotubes on Ti-Nb-Fe alloys for biomedical applications: Synthesis and characterizationElectrochemistry Communications, 2022
- Influencing parameters in the electrochemical anodization of TiO2 nanotubes: Systematic review and meta-analysisCeramics International, 2022
- Single-step fabrication of highly stable amorphous TiO2 nanotubes arrays (am-TNTA) for stimulating gas-phase photoreduction of CO2 to methaneChemosphere, 2022
- Controlling anodization time to monitor film thickness, phase composition and crystal orientation during anodic growth of TiO2 nanotubesElectrochemistry Communications, 2022
- Study of the influence of anodizing parameters on the photocatalytic activity of preferred oriented TiO2 nanotubes self-doped by carbonApplied Surface Science, 2022
- Fabrication of titanium dioxide nanotubes by difference the anodization voltage and timeMaterials Today: Proceedings, 2021
- Investigation of photoelectrochemical properties of TiO2 nanotube arrays prepared by anodization methodVietnam Journal of Chemistry, 2020
- Solar-responsive photocatalytic activity of amorphous TiO2 nanotube-array filmsMaterials Science in Semiconductor Processing, 2019