Ultrafiltration of palm oil mill effluent: Effects of operational pressure and stirring speed on performance and membranes fouling
Open Access
- 22 August 2018
- journal article
- research article
- Published by Korean Society of Environmental Engineering in Environmental Engineering Research
- Vol. 24 (2) , 263-270
Abstract
The best operation condition at 1 bar and stirring speed 600 rpm. At this condition, fouling resistance of those membranes were not too high compared to higher pressure, and showed good permeate quality.Keywords
This publication has 26 references indexed in Scilit:
- Wastewater Treatment of Palm Oil Mill Effluent (POME) by Ultrafiltration Membrane Separation Technique Coupled with Adsorption Treatment as Pre-treatmentAgriculture and Agricultural Science Procedia, 2014
- Ultrafiltration in Food Processing Industry: Review on Application, Membrane Fouling, and Fouling ControlFood and Bioprocess Technology, 2012
- Clarification of pomegranate juice by microfiltration with PVDF membranesDesalination, 2010
- Adsorption of phenolic compounds on low-cost adsorbents: A reviewAdvances in Colloid and Interface Science, 2008
- Palm oil mill effluent (POME) treatment and bioresources recovery using ultrafiltration membrane: Effect of pressure on membrane foulingBiochemical Engineering Journal, 2007
- Residual oil and suspended solid removal using natural adsorbents chitosan, bentonite and activated carbon: A comparative studyChemical Engineering Journal, 2005
- Water recycling from palm oil mill effluent (POME) using membrane technologyDesalination, 2003
- Influence of macromolecule adsorption during filtration of a membrane bioreactor mixed liquor suspensionJournal of Membrane Science, 2002
- Membrane separations in biotechnologyCurrent Opinion in Biotechnology, 2001
- Influence of hydrodynamics on fouling velocity in a recirculated MBR for wastewater treatmentJournal of Membrane Science, 1999