Influence of resin cement and thermocycling on milled lithium disilicate ceramic microshear bond strength
Open Access
- 1 December 2021
- journal article
- research article
- Published by Sociedad Argentina de Investigacion Odontologica in Acta Odontológica Latinoamericana
- Vol. 34 (3) , 226-232
Abstract
The aim of this study was to compare the microshear bond strength of different resin cements to CAD/CAM-created lithium disilicate ceramics after 24 hours and after 1 year (10,000 thermocycles). Forty (40) ceramic bars were subjected to pretreatment comprising airborne abrasion with aluminum oxide particles, etching with 10% hydrofluoric acid and Monobond N application. Bars were divided into 4 groups (n = 10), based on cement type: light-cured Variolink Esthetic LC (VLC) and dual-cured Variolink N (VN) at two different times: after 24 hours and after 1 year. Silicone molds were used to prepare cement cylinders on a ceramic surface. The set was stored in distilled water at 37ºC, for 24 hours or subjected to 10,000 thermocycles. The molds were removed and microshear bond strength was tested. Data were submitted to two-way analysis of variance and Tukey’s test (α = 0.05). Based on the comparison between cement values at different aging times (p = 0.035), VN after 24 hours (27.10 ± 0.92) and after 1 year (20.62 ± 1.25) presented significantly higher values than VLC after 24 hours (14.79 ± 0.76) and after 1 year (6.61 ± 0.81). Bond strength recorded for both cements after 24 hours (VN: 27.10 ± 0.92 and VLC: 14.79 ± 0.76) was significantly higher than the one recorded after 1 year (VN: 20.62 ± 1.25 and VLC: 6.61 ± 0.81). The thermocycling reduced the values observed for both investigated cements; bond strength was greater for dual-cure resin cement than for light-cured resin cement.Keywords
This publication has 23 references indexed in Scilit:
- Strengthening of Porcelain Provided by Resin Cements and Flowable CompositesOperative Dentistry, 2016
- Lithium Disilicate Restorations Fatigue Testing Parameters: A Systematic ReviewJournal of Prosthodontics, 2015
- Silanated Surface Treatment: Effects on the Bond Strength to Lithium Disilicate Glass-CeramicBrazilian Dental Journal, 2015
- Ceramic dental biomaterials and CAD/CAM technology: State of the artJournal of Prosthodontic Research, 2014
- Aspects of bonding between resin luting cements and glass ceramic materialsDental Materials, 2014
- Do the Microshear Test Variables Affect the Bond Strength Values?International Journal of Dentistry, 2012
- Dynamic and static mechanical analysis of resin luting cementsJournal of the Mechanical Behavior of Biomedical Materials, 2012
- Effect of light-curing method and indirect veneering materials on the Knoop hardness of a resin cementBrazilian Oral Research, 2009
- Bond Durability of Composite Luting Agents to Ceramic When Exposed to Long-term ThermocyclingOperative Dentistry, 2007
- Micro-shear bond strength of dual-cured resin cement to glass ceramicsDental Materials, 2002