High efficiency constant voltage control of LC/S compensated wireless power transfer converter based on pulse density modulation control
Authors:
- 28 November 2021
- journal article
- research article
- Published by Taylor & Francis in International Journal of Electronics
- Vol. 110 (1) , 54-72
Abstract
In this work, the secondary side controlled wireless power transfer (WPT) converter using a LC/S compensation topology is proposed. The constant voltage charging control mode of the proposed converter is evaluated based on high efficiency. In the secondary side, a semi-bridgeless active rectifier (SBAR) is used for the output voltage regulation. In order to improve the efficiency performance of the converter, the pulse density modulation (PDM) control method is applied to the switches of the SBAR. The primary switches operate at the constant operation frequency as independent of the secondary side. There is no communication needed between primary and secondary sides of the proposed converter. Besides, the switches of the SBAR operate with soft switching. The basic principles of the LC/S compensation network and SBAR topology are presented with steady state analysis. The PDM control strategy applied to the switches of the SBAR is discussed. In order to validate the performance of the proposed converter, a prototype is built with 8 cm air gap coreless coupling coils. The input voltage of the converter is 30 V, and its maximum output power is 60 W. The maximum efficiency is achieved as 85.26% at full load condition during CV regulation.Keywords
Funding Information
- Pamukkale University (2020FEBE034)
This publication has 39 references indexed in Scilit:
- A Dual-Side Controlled Inductive Power Transfer System Optimized for Large Coupling Factor Variations and Partial LoadIEEE Transactions on Power Electronics, 2015
- Maximum Energy Efficiency Tracking for Wireless Power Transfer SystemsIEEE Transactions on Power Electronics, 2014
- A Double-Sided LCC Compensation Network and Its Tuning Method for Wireless Power TransferIEEE Transactions on Vehicular Technology, 2014
- High-Efficiency Contactless Power Transfer System for Electric Vehicle Battery Charging ApplicationIEEE Journal of Emerging and Selected Topics in Power Electronics, 2014
- Analysis and Control of Series/Series-Parallel Compensated Resonant Converter for Contactless Power TransferIEEE Journal of Emerging and Selected Topics in Power Electronics, 2014
- ZCS $LCC$-Compensated Resonant Inverter for Inductive-Power-Transfer ApplicationIEEE Transactions on Industrial Electronics, 2010
- Design of a high frequency Inductively Coupled Power Transfer system for electric vehicle battery chargeApplied Energy, 2009
- Design Considerations for a Contactless Electric Vehicle Battery ChargerIEEE Transactions on Industrial Electronics, 2005
- Investigating an LCL Load Resonant Inverter for Inductive Power Transfer ApplicationsIEEE Transactions on Power Electronics, 2004
- A contactless electrical energy transmission system for portable-telephone battery chargersIEEE Transactions on Industrial Electronics, 2003