Microstructures and Tensile Properties of AZ91 Magnesium Alloys with Ca, Sm, and La Elements Additions
Authors:
- 29 August 2017
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 19 (12)
Abstract
Microstructures and tensile properties of as‐cast and as‐extruded AZ91 magnesium alloys with individual and combined additions of Ca, Sm, and La elements are investigated. The results show that Al2Ca, Al2Sm, and Al11La3 new phases form after adding Ca, Sm, La elements, decreasing the amount of Mg17Al12 phases and refining the microstructures. Microstructures of as‐cast and as‐extruded alloys with combined additions are significant refined. The Al2Ca and Al11La3 intermetallic compounds are crushed into granules because of severe deformation during hot extrusion, while the Al2Sm intermetallic compounds are not. Tensile tests results at room temperature indicate that individual additions of Ca, Sm, and La elements could increase the elongation of as‐extruded alloys, and tensile tests results at 150 °C indicate that individual additions of Sm and La elements could increase the ultimate tensile strength and yield strength of as‐extruded alloys. AZ91–0.3La alloy exhibits the best comprehensive tensile properties both at room temperature and 150 °C. However, combined additions in AZ91 alloys leads to coarseness and aggregation of Al2Sm phases, resulting in slightly decline of tensile properties both at room temperature and 150 °C.Keywords
Funding Information
- National Key Research and Development Program of China (2016YFB0301104, 2016YFB0301101)
- Natural Basic Research Development Program of China (2013CB632203)
This publication has 22 references indexed in Scilit:
- Effect of long period stacking ordered phase on the microstructure, texture and mechanical properties of extruded Mg–Y–Zn alloyMaterials Science and Engineering: A, 2013
- Effects of samarium on microstructures and tensile properties of Mg–5Al–0.3Mn alloyMaterials Science and Engineering: A, 2011
- The effect of Ca on corrosion behavior of heat‐treated Mg–Al–Zn alloyMaterials and Corrosion, 2011
- Microstructures and mechanical properties of the extruded Mg-4Y-2Gd-xZn-0.4Zr alloysJournal of Alloys and Compounds, 2011
- Effect of sodium silicate pretreatment on phosphate layer: Morphology and corrosion resistance behaviorMaterials and Corrosion, 2010
- Effects of RE and Sr additions on dendrite growth and phase precipitation in AZ91D magnesium alloyTransactions of Nonferrous Metals Society of China, 2010
- Effect of rare earth additions on microstructure and mechanical properties of AZ91 magnesium alloysTransactions of Nonferrous Metals Society of China, 2010
- High temperature tensile properties of as-cast Mg–Al–Ca alloysMaterials Science and Engineering: A, 2009
- Trends in the Development of New Mg AlloysAnnual Review of Materials Research, 2008
- Improved heat resistance of Mg-Al alloys by the Ca additionActa Metallurgica et Materialia, 1995