Effects of heat input on welding buckling distortion by experimental measurement method
Authors:
- 1 July 2017
- journal article
- research article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 22 (5) , 381-388
Abstract
An experimental method based on digital image correlation technology is proposed to measure welding buckling distortion for bead-on-plane with tungsten inert gas welding. This study focuses on the effect of welding heat input for dynamic buckling and full-field distribution. The experimental results demonstrate that heat input has a great influence on welding buckling distortion. The longitudinal shrinkage of the weld bead is in direct proportion to the heat input. In the weld bead, the longitudinal plastic strain is small, while the transverse strain is large. The key points on the line, that is perpendicular to the bisector of the weld bead, experience a distorted trend of positive increase, constant displacement, negative increase and stable displacement, although the heat inputs are different.Keywords
Funding Information
- National Natural Science Foundation of China (51421004)
This publication has 19 references indexed in Scilit:
- Experimental and numerical investigations of welding distortion induced by CO2 gas arc welding in thin-plate bead-on jointsMaterials & Design (1980-2015), 2013
- Experimental and computational analysis of residual buckling distortion of bead-on-plate welded jointJournal of Materials Processing Technology, 2013
- Strain-Based Assessment and Modeling for Low-Distortion Welding ProcedureMaterials and Manufacturing Processes, 2012
- Assessment of Residual Stresses and Distortion in Stainless Steel Weld JointsMaterials and Manufacturing Processes, 2012
- Applications of inherent strain and interface element to simulation of welding deformation in thin plate structuresComputational Materials Science, 2012
- Effect of welding sequence on residual stress and distortion in flat-bar stiffened platesMarine Structures, 2010
- Investigations on welding distortion in an asymmetrical curved block by means of numerical simulation technology and experimental methodComputational Materials Science, 2010
- FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effectsMaterials & Design (1980-2015), 2009
- Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurementsComputational Materials Science, 2006
- Computational prediction of out-of-plane welding distortion and experimental investigationThe Journal of Strain Analysis for Engineering Design, 2005