Enhancement of mechanical, thermal and water uptake performance of TPU/jute fiber green composites via chemical treatments on fiber surface
Authors:
Open Access
- 1 January 2020
- journal article
- conference paper
- Published by Walter de Gruyter GmbH in e-Polymers
- Vol. 20 (1) , 133-143
Abstract
Chopped jute fiber (JF) surfaces were modified using alkaline, silane and eco-grade epoxy resin. Surface characteristics of jute fibers were confirmed by FTIR and EDX analyses. JF filled polyurethane elastomer (TPU) composites were prepared via extrusion process. The effect of surface modifications of JF on mechanical, thermo-mechanical, melt-flow, water uptake and morphological properties of TPU-based eco-composites were investigated by tensile and hardness tests, dynamic mechanical analysis (DMA), melt flow index (MFI) test, water absorption measurements and scanning electron microscopy (SEM) techniques, respectively. Mechanical test results showed that silane and epoxy treated JF additions led to increase in tensile strength, modulus and hardness of TPU. Glass transition temperature (Tg) of TPU rose up to higher values after JF inclusions regardless of treatment type. Si-JF filled TPU exhibited the lowest water absorption among composites. Surface treated JFs displayed homogeneous dispersion into TPU and their surface were covered by TPU according to SEM micro-photographs.Keywords
This publication has 58 references indexed in Scilit:
- Bionanowhiskers from jute: Preparation and characterizationCarbohydrate Polymers, 2013
- Fabrication and Mechanical Characterization of Jute Fabrics: Reinforced Polyvinyl Chloride/Polypropylene Hybrid CompositesInternational Journal of Polymeric Materials and Polymeric Biomaterials, 2011
- Fabrication and Characterization of Jute Reinforced Polypropylene Composite: Effectiveness of Coupling AgentsJournal of Composite Materials, 2010
- Development of Recycled Polypropylene Matrix Composites Reinforced with Waste Jute CaddiesJournal of Reinforced Plastics and Composites, 2009
- Jute Reinforced Polypropylene Composite: Effect of Surface Pretreatment by Photocuring with Acrylic MonomersJournal of Reinforced Plastics and Composites, 2008
- Dynamic mechanical and thermal properties of PE‐EPDM based jute fiber compositesJournal of Applied Polymer Science, 2008
- Silane Coupling Agents in Polymer-based Reinforced Composites: A ReviewJournal of Reinforced Plastics and Composites, 2008
- Effect of γ‐aminopropyl trimethoxy silane on the performance of jute–polycarbonate compositesJournal of Applied Polymer Science, 2006
- Natural Fibers, Biopolymers, and Biocomposites2005
- Study of the Role of Silane-treated Filler on the Compatibility of Polypropylene/Polystyrene Blends at Different RatiosThe Journal of Adhesion, 1997