Implementing and evaluating far-field 3D X-ray diffraction at the I12 JEEP beamline, Diamond Light Source
Open Access
- 16 May 2022
- journal article
- research article
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 29 (4) , 1043-1053
Abstract
Three-dimensional X-ray diffraction (3DXRD) is shown to be feasible at the I12 Joint Engineering, Environmental and Processing (JEEP) beamline of Diamond Light Source. As a demonstration, a microstructually simple low-carbon ferritic steel was studied in a highly textured and annealed state. A processing pipeline suited to this beamline was created, using software already established in the 3DXRD user community, enabling grain centre-of-mass positions, orientations and strain tensor elements to be determined. Orientations, with texture measurements independently validated from electron backscatter diffraction (EBSD) data, possessed a ∼0.1° uncertainty, comparable with other 3DXRD instruments. The spatial resolution was limited by the far-field detector pixel size; the average of the grain centre of mass position errors was determined as ±∼80 µm. An average per-grain error of ∼1 × 10−3 for the elastic strains was also measured; this could be reduced in future experiments by improving sample preparation, geometry calibration, data collection and analysis techniques. Application of 3DXRD onto I12 shows great potential, where its implementation is highly desirable due to the flexible, open architecture of the beamline. User-owned or designed sample environments can be used, thus 3DXRD could be applied to previously unexplored scientific areas.Keywords
All Related Versions
Funding Information
- Diamond Light Source
- University of Birmingham
- Engineering and Physical Sciences Research Council (EP/R030537/1)
This publication has 34 references indexed in Scilit:
- Complete elliptical ring geometry provides energy and instrument calibration for synchrotron-based two-dimensional X-ray diffractionJournal of Applied Crystallography, 2013
- A feasibility study of dynamic stress analysis inside a running internal combustion engine using synchrotron X-ray beamsJournal of Synchrotron Radiation, 2013
- Far-field high-energy diffraction microscopy: a tool for intergranular orientation and strain analysisThe Journal of Strain Analysis for Engineering Design, 2011
- High-energy diffraction microscopy at the advanced photon sourceJOM, 2011
- Determining grain resolved stresses in polycrystalline materials using three-dimensional X-ray diffractionJournal of Applied Crystallography, 2010
- Texture Analysis with MTEX – Free and Open Source Software ToolboxSolid State Phenomena, 2010
- X-ray microscopy in four dimensionsMaterials Today, 2006
- Standard Reference Material (SRM 1990) for single crystal diffractometer alignmentJournal of Research of the National Institute of Standards and Technology, 2001
- The metallurgy of zinc-coated steelProgress in Materials Science, 2000
- Applications of High-Energy Synchrotron Radiation for Structural Studies of Polycrystalline MaterialsJournal of Synchrotron Radiation, 1997