The Effect of Variable Engine Parameters on Performance and Emissions of DI Diesel Engine Running on Diesel-Biodiesel Blended with Nano Additives
Authors:
Open Access
- 1 February 2021
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1094 (1) , 012122
Abstract
An experimental investigation was conducted to study the effect of variable engine parameters like injection timing and compression ratio on performance and emission characteristics of single cylinder four stroke Ricardo E6/US diesel engine at a constant speed (1800rpm) running on diesel fuel biodiesel blends with nano additive. By transesterification process, the biodiesel was produced from waste cooking oil. The mixture percentage consisted of diesel fuel (B5, B10, B15, and B20) vol%, iron oxide nanoparticle (Fe2O3), particle size of 20 nm and different weight fractions (10ppm, 30ppm, 50ppm, 70ppm, and 100ppm) wt%. The injection timing was regulated for (20°, 30°, 38°, and 40°) bTDC, while compression ratio was (16:1, 17:1, 18:1 and 20:1). The design of experiments (DOE) approach of Taguchi method was employed to predict the optimum parameter settings for engine performance like biodiesel blend (B20), nano additive (100ppm), injection timing (38° bTDC), and compression ratio (17). The experimental results showed that the addition of nano additive to biofuel gives increased brake thermal efficiency (BTE) by 15.05% and reduced brake specific fuel consumption (BSFC) by 10.73%. Furthermore, the exhaust emissions like CO, HC, and smoke density reduced by 62.5%, 63.01%, 28.9%, respectively, but NOx, PM increased by 16.19%, 15.30%, respectively, compared to diesel fuel.Keywords
This publication has 6 references indexed in Scilit:
- Effect of Al2O3 and SiO2 Metal Oxide Nanoparticles Blended with POME on Combustion, Performance and Emissions Characteristics of a Diesel EngineInternational Journal of Automotive and Mechanical Engineering, 2019
- Experimental analysis on performance of diesel engine using mixture of diesel and bio-diesel as a working fuel with aluminum oxide nanoparticle additiveThermal Science and Engineering Progress, 2017
- Experimental investigation of injection timing on the performance and exhaust emissions of a rubber seed oil blend fuel in constant speed diesel engineInternational Journal of Ambient Energy, 2017
- Application of CFD, Taguchi Method, and ANOVA Technique to Optimize Combustion and Emissions in a Light Duty Diesel EngineMathematical Problems in Engineering, 2014
- Optimization of diesel engine parameters using Taguchi method and design of evolutionJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2012
- Aqueous Aluminum Nanofluid Combustion in Diesel FuelJournal of Testing and Evaluation, 2008