Static and Economic Analyses of Driven Steel H-Piles in IGM Using the WyoPile Database
- 1 May 2020
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 25 (5)
Abstract
Intermediate geomaterials (IGMs) have been long recognized as highly variable geomaterials that introduce challenges during the design and construction of driven piles. Because of the lack of a well-organized and high-quality-assured database of driven piles in IGMs, adequate studies are limited to establishing trustworthy design methodologies and to calibrate load and resistance factor design procedures. Static analysis (SA) methods formulated using pile data on soils are currently employed for estimating resistances of piles driven in IGMs. An electronic database (WyoPile) enriched with complete data for static and dynamic analysis of 35 steel H-piles driven in IGMs was developed. WyoPile was used to evaluate the efficiency of five SA methods for estimation of shaft resistance and end bearing of piles driven in IGMs. Current SA methods are proven to be inefficient in the estimation of both shaft resistance and end bearing due to relatively low efficiency factors. Moreover, an economic impact study reveals the overestimation of pile resistances by current SA methods using the AASHTO recommendations, which result in cost overruns associated with driving additional steel piles with an average of 0.085 kg/kN (0.84 lb/kip) of the applied load.Keywords
This publication has 15 references indexed in Scilit:
- A procedure for incorporating setup into load and resistance factor design of driven pilesActa Geotechnica, 2015
- Development and Use of High-Quality Databases of Deep Foundation Load TestsTransportation Research Record: Journal of the Transportation Research Board, 2015
- Pile Setup in Cohesive Soil. II: Analytical Quantifications and Design RecommendationsJournal of Geotechnical and Geoenvironmental Engineering, 2013
- Pile Setup in Cohesive Soil. I: Experimental InvestigationJournal of Geotechnical and Geoenvironmental Engineering, 2013
- Introduction to PILOT Database and Establishment of LRFD Resistance Factors for the Construction Control of Driven Steel H-PilesJournal of Bridge Engineering, 2011
- Current Design and Construction Practices of Bridge Pile Foundations with Emphasis on Implementation of LRFDJournal of Bridge Engineering, 2010
- Driven Pile Capacity in Intermediate Geomaterial Formations2009
- FHWA Deep Foundation Load Test Database2000
- Load and Resistance Factor Design (LRFD) for Driven Piles Using Dynamic Methods—A Florida PerspectiveGeotechnical Testing Journal, 2000
- Pile Foundations1991