Numerical analysis of the heat source characteristics of a two-electrode TIG arc
Authors:
- 6 May 2011
- journal article
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 44 (21)
Abstract
Various kinds of multi-electrode welding processes are used to ensure high productivity in industrial fields such as shipbuilding, automotive manufacturing and pipe fabrication. However, it is difficult to obtain the optimum welding conditions for a specific product, because there are many operating parameters, and because welding phenomena are very complicated. In the present research, the heat source characteristics of a two-electrode TIG arc were numerically investigated using a 3D arc plasma model with a focus on the distance between the two electrodes. The arc plasma shape changed significantly, depending on the electrode spacing. The heat source characteristics, such as the heat input density and the arc pressure distribution, changed significantly when the electrode separation was varied. The maximum arc pressure of the two-electrode TIG arc was much lower than that of a single-electrode TIG. However, the total heat input of the two-electrode TIG arc was nearly constant and was independent of the electrode spacing. These heat source characteristics of the two-electrode TIG arc are useful for controlling the heat input distribution at a low arc pressure. Therefore, these results indicate the possibility of a heat source based on a two-electrode TIG arc that is capable of high heat input at low pressures.Keywords
This publication has 24 references indexed in Scilit:
- Development of low spatter CO2 arc welding process with high frequency pulse currentScience and Technology of Welding and Joining, 2009
- Controlled bridge transfer (CBT) gas metal arc process for steel sheets joiningScience and Technology of Welding and Joining, 2009
- Magnetic Control of Arc Plasma and its ModellingWelding in the World, 2009
- Solution to problems of arc interruption and arc length control in tandem pulsed gas metal arc weldingScience and Technology of Welding and Joining, 2009
- Development of an advanced A-TIG (AA-TIG) welding method by control of Marangoni convectionMaterials Science and Engineering: A, 2008
- The effect of shielding gas composition in CO2 laser—gas metal arc hybrid weldingProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2008
- Predictions of weld formation using gas tungsten arcs for various arc lengths from unified arc-electrode modelScience and Technology of Welding and Joining, 2007
- Numerical simulation on interaction between TIG welding arc and weld poolComputational Materials Science, 2006
- The characteristic of twin-electrode TIG coupling arc pressureJournal of Physics D: Applied Physics, 2006
- Two-dimensional analysis of free burning arcs in argonJournal of Physics D: Applied Physics, 1985