Evaluating shear test methods for stabilised rammed earth
Authors:
- Jing Siong John CheahJCJing Siong John Cheah
- Pete WalkerPWPete Walker
- Andrew HeathAHAndrew Heath
- Te Kipa Kepa Brian MorganTMTe Kipa Kepa Brian Morgan
- 1 December 2012
- journal article
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Construction Materials
- Vol. 165 (6) , 325-334
Abstract
Rammed earth is an accessible, sustainable and increasingly popular building material. Owing to a lack of research, current design standards for rammed earth have taken a conservative stance on material attributes like shear strength. Evaluating the shear strength of rammed earth is particularly important in seismic areas because of the material's high mass, low ductility and propensity to fail in shear. Shear test methods designed for other materials have typically been used in practice to determine the shear strength of rammed earth. In this research the design shear strength guidance available in current earth building standards was compared with experimental shear strength results for stabilised rammed earth. The triaxial (geotechnical) and triplet (masonry) tests were used to evaluate specimens reinforced with natural fibres: sisal and New Zealand flax. Both shear test methods showed that the shear strength capacity of cement-stabilised rammed earth was greater than the current guidance provided in the earth building standards. Recommendations were made to use the triaxial test to evaluate the shear strength of stabilised rammed earth and to allow the use of design shear strength equal to 7% of the compressive strength.Keywords
This publication has 11 references indexed in Scilit:
- Clay-based composite stabilized with natural polymer and fibreConstruction and Building Materials, 2010
- The strength of unstabilised rammed earth materialsGéotechnique, 2009
- Chronological Description of the Spatial Development of Rammed Earth TechniquesInternational Journal of Architectural Heritage, 2008
- Development of high strength biodegradable composites using Manila hemp fiber and starch-based biodegradable resinComposites Part A: Applied Science and Manufacturing, 2006
- Performance of composite soil reinforced with barley strawCement and Concrete Composites, 2005
- Extraction, content, strength, and extension of Phormium variety fibres prepared for traditional Maori weavingNew Zealand Journal of Botany, 2000
- THE USE OF SISAL FIBRE AS REINFORCEMENT IN CEMENT BASED COMPOSITESRevista Brasileira de Engenharia Agrícola E Ambiental, 1999
- In-plane seismic response of brick masonry wallsEarthquake Engineering & Structural Dynamics, 1997
- Static and dynamic fracture properties of the leaf of New Zealand flax Phormium tenax (Phormiaceae: Monocotyledones)Proceedings Of The Royal Society B-Biological Sciences, 1996
- ULTIMATE STRENGTH OF RAMMED EARTH WALLS WITH OPENINGS.Proceedings of the Institution of Civil Engineers - Structures and Buildings, 1995