A Comparison of Cement and Guar Gum Stabilisation of Oxford Clay Under Controlled Wetting and Drying Cycles
Open Access
- 19 June 2025
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 15 (12) , 6913
Abstract
Climate-induced wetting and drying (WD) cycles significantly affect the long-term performance of geotechnical structures. This study explores expansive Oxford clay’s mechanical and volumetric responses stabilised with ordinary Portland cement (OPC) and guar gum (GG) under repeated WD cycles. We prepared 108 samples in total—36 untreated, 36 treated with OPC, and 36 treated with GG. These samples were compacted to 90% of their maximum dry density and subjected to 1, 5, 10, and 15 WD cycles, with nine samples for each treatment at each cycle. During the WD cycles, we monitored volumetric strain and moisture content. Mechanical performance was assessed through unconsolidated undrained triaxial tests conducted at matric suctions of −1500 kPa, −33 kPa, and under saturated conditions. We evaluated the undrained shear strength (Su), secant modulus of elasticity (E50), and modulus of toughness (Ut). The results showed that OPC-treated samples consistently exhibited the highest Su at −1500 kPa across all WD cycles, followed by untreated and GG-treated samples. At −33 kPa, OPC-treated samples again outperformed the others in Su, while GG-treated samples performed better than the untreated ones. Under saturated conditions, GG-treated samples displayed a similar Su to OPC-treated samples, significantly higher than untreated samples. Energy absorption capacity, measured through Ut, peaked for OPC-treated samples at −1500 kPa but favoured GG treatment at −33 kPa and under saturation. X-ray computed tomography (CT) revealed severe degradation in untreated samples, characterised by extensive cracking, minor cracking in OPC-treated samples, and minimal damage in GG-treated samples. This highlights the superior resilience of guar gum to wetting–drying cycles. These findings underscore the potential of guar gum as a sustainable alternative to cement for enhancing the WD resilience of expansive soils, particularly under low-suction or saturated conditions.Keywords
Funding Information
- PhD Vice Chancellor Scholarship
This publication has 44 references indexed in Scilit:
- Sustainability and Resilience: A New Paradigm in Geotechnical and Geoenvironmental EngineeringIndian Geotechnical Journal, 2024
- Sustainable utilization of biopolymers as green adhesive in soil improvement: a reviewEnvironmental Science and Pollution Research, 2023
- Geotechnical properties of problematic expansive subgrade stabilized with guar gum biopolymerClean Technologies and Environmental Policy, 2023
- Understanding the microstructure, mineralogical and adsorption characteristics of guar gum blended soil as a liner materialEnvironmental Monitoring and Assessment, 2021
- Enhancing the Properties of Expansive Soil Using Biopolymers—Xanthan Gum and Guar Gum2021
- Effects of wetting-drying cycles and desiccation cracks on mechanical behavior of an unsaturated soilCATENA, 2020
- Impact of wetting—drying cycles on the mechanical properties of lime-stabilized soilsInternational Journal of Pavement Research and Technology, 2019
- Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industryCement and Concrete Research, 2018
- Impact of wetting–drying cycles on hydro-mechanical behavior of an unsaturated compacted clayApplied Clay Science, 2013
- Amer Ali Al-Rawas and Mattheus F. A. Goosen (eds.): Expansive soils. Recent advances in characterization and treatmentBulletin of Engineering Geology and the Environment, 2007