Sensorless initial rotor position identification for non‐salient permanent magnet synchronous motors based on dynamic reluctance difference
Authors:
Open Access
- 1 September 2014
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 7 (9) , 2336-2346
Abstract
Due to the equivalence between the d ‐axis and q ‐axis static reluctance in non‐salient permanent magnet synchronous motors (PMSMs), the traditional saliency‐tracking self‐sensing strategies appear powerless for rotor position identification. However, the nonlinear magnet saturation characteristic results in much larger d ‐axis dynamic reluctance than that in q ‐axis, then two novel methods based on the dynamic reluctance difference are proposed for sensorless initial rotor position detection. In the high frequency rotating voltage injection method, the positive‐sequence and negative‐sequence second‐harmonic carrier current components are used to estimate two pre‐angles simultaneity and separately, where the final estimated rotor position is calculated with the offset angle caused by q ‐axis dynamic reluctance eliminated. In the high frequency pulsating voltage injection method, the cosine second‐harmonic carrier current component contains rotor position and magnet polarity information. The position signal is employed to estimate the possible pre‐angles from three symmetrical and equidistant initial estimated angles respectively, where the pre‐angle with the largest and negative polarity signal is the final estimated rotor position. Both methods can accomplish the rotor position estimation without an additional polarity detecting process. The simulation and confirmatory experimental results on a surface‐mounted PMSM demonstrated the proposed methods can estimate initial position reliably and fast at standstill.Keywords
This publication has 16 references indexed in Scilit:
- Unconventional methods for PM Synchronous Motor parameters investigation2012
- Investigation of Effectiveness of Sensorless Operation in Carrier-Signal-Injection-Based Sensorless-Control MethodsIEEE Transactions on Industrial Electronics, 2010
- Initial Rotor Position and Magnetic Polarity Identification of PM Synchronous Machine Based on Nonlinear Machine Model and Finite Element AnalysisIEEE Transactions on Magnetics, 2010
- Carrier-Signal Selection for Sensorless Control of PM Synchronous Machines at Zero and Very Low SpeedsIEEE Transactions on Industry Applications, 2009
- Robust Magnet Polarity Estimation for Initialization of PM Synchronous Machines With Near-Zero SaliencyIEEE Transactions on Industry Applications, 2008
- Initial rotor position estimation and sensorless direct torque control of surface-mounted permanent magnet synchronous motors considering saturation saliencyIET Electric Power Applications, 2008
- A New Standstill Position Detection Technique for Nonsalient Permanent-Magnet Synchronous Motors Using the Magnetic Anisotropy MethodIEEE Transactions on Magnetics, 2007
- Initial rotor position estimation of an interior permanent-magnet synchronous machine using carrier-frequency injection methodsIEEE Transactions on Industry Applications, 2005
- A Novel Method for Initial Rotor Position Estimation for IPM Synchronous Machine DrivesIEEE Transactions on Industry Applications, 2004
- Sensorless initial rotor position estimation of surface permanent-magnet synchronous motorIEEE Transactions on Industry Applications, 2000