The Influence of Tool Rake Surface Geometry on the Hard Turning Process of AISI52100 Hardened Steel
Open Access
- 23 September 2019
- Vol. 12 (19) , 3096
Abstract
The hard turning process has been widely used in the field of hard material precision machining because of its high efficiency, low processing residual stress, and low environmental pollution. Due to its undesirably processing quality, it is still not a substitute for traditional grinding, so many studies have reported that the process has been optimized. However, there has been little research on the geometry optimization of hard cutting tools, which have a great influence on the traditional machining process. In this paper, two tools with different rake face shapes are designed. The finite element analysis method is used to compare their performance with a conventional plane tool while turning hardened steel. The results show that the cutting performance of the designed tool T1 and T2 (chip morphology, cutting force, and cutting temperature) and the quality of the machined surface are improved compared with the tool. The cutting force decreased by 12.72% and 14.74%, the cutting temperature decreased by 7.56% and 9.01%, respectively, and the surface residual stress decreased by 26.56% and 28.66%.Keywords
Funding Information
- National Natural Science Foundation of China (51605207)
- Natural Science Foundation of Jiangsu Province (BK20160563)
- Graduate Research and Innovation Projects of Jiangsu Province (SJCX19_0607)
This publication has 40 references indexed in Scilit:
- Multi-objective optimization of cutting parameters during sustainable dry hard turning of AISI 52100 steel with newly develop HSN2-coated carbide insertMeasurement, 2019
- Performance of cutting tools with dimple textured surfaces: A comparative study of different texture patternsPrecision Engineering, 2017
- Cutting performance of micro-textured polycrystalline diamond tool in dry cuttingJournal of Manufacturing Processes, 2017
- Comparative assessment of wiper and conventional ceramic tools on surface roughness in hard turning AISI 4140 steelMeasurement, 2013
- Micro-texture at the coated tool face for high performance cuttingInternational Journal of Machine Tools and Manufacture, 2011
- Computational modelling of 3D turning: Influence of edge micro-geometry on forces, stresses, friction and tool wear in PcBN toolingJournal of Materials Processing Technology, 2009
- A finite element analysis of orthogonal machining using different tool edge geometriesJournal of Materials Processing Technology, 2004
- Cutting of Hardened SteelCIRP Annals, 2000
- Effect of Tool Edge Geometry on Workpiece Subsurface Deformation and Through-Thickness Residual Stresses for Hard Turning of AISI 52100 SteelJournal of Manufacturing Processes, 2000
- A model for non-free-cuttingInternational Journal of Machine Tools and Manufacture, 1995