Effects of Different Plasma Nitrided Layers on the Tribological Performance of DLC Coatings
Open Access
- 12 September 2016
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 19 (5) , 1180-1188
Abstract
When multifunctional surface engineering processes that combine purpose-oriented phases are applied to soft substrates, a combination of high wear resistance, high load support and low coefficients of friction can be achieved. In this study, the effects of different nitrided layers on the tribological behaviour of a diamond-like carbon (DLC) film deposited on a SAE 1040 steel were investigated. The nitriding was carried out under different temperatures and gas mixtures to create three distinct nitrided layers: two compound layers with predominant ε and γ' phases and a diffusion layer. All of the surfaces were then coated with DLC deposited via plasma-enhanced chemical vapour deposition (PECVD). The tribological tests indicated that the best performance was achieved for a specific combination of hardness, surface roughness and nitride type. The best load-bearing capacity between the DLC coating and the soft substrate was achieved when the nitrided layer was primarily a diffusion layer.Keywords
This publication has 33 references indexed in Scilit:
- Orientation dependence of nitrogen supersaturation in austenitic stainless steel during low-temperature gas-phase nitridingActa Materialia, 2014
- Effect of Surface Roughening of Substrate Steel on the Improvement of Delamination Strength and Tribological Behavior of Hydrogenated Amorphous Carbon Coating Under Lubricated ConditionsTribology Letters, 2013
- Tribology of Diamond-Like Carbon Films2008
- Controlled dissolution of colossal quantities of nitrogen in stainless steelMetallurgical and Materials Transactions A, 2006
- Effects of Si content in DLC films on their friction and wear propertiesSurface and Coatings Technology, 2005
- Numerical and experimental analyses on the contact stresses developed during single and successive indentations of coated systemsSurface and Coatings Technology, 2004
- Evaluation of PVD nitride coatings, using impact, scratch and Rockwell-C adhesion testsThin Solid Films, 1995
- Tribological characteristics of DLC films and duplex plasma nitriding/DLC coating treatmentsSurface and Coatings Technology, 1995
- High performance cutting tools with a solid lubricant physically vapour- deposited coatingSurface and Coatings Technology, 1993
- Properties and characteristics of advanced tribological surface coatings and the assessment of quality-for-performance for enhanced manufacturing efficiencyJournal of Materials Processing Technology, 1993