An Analysis of a Reheater Failure and a Proposal to Upgrade the Device Design
Open Access
Abstract
The aim of this paper is to present an example of damage to the reheater tubes and conduct the material and numerical analyses to establish the cause of the device failure. Cracks were observed on the first, second, and third tube row. Close to the damaged area, a ferritic structure could be observed with highly degraded bainite areas, characterized by coagulation and coalescence of precipitates. The cause of the damage was analysed using the finite element method (FEM). The big yield of the tube cross-section confirmed that the tube may get damaged during subsequent cycles of the boiler operation, which was also proved by the microstructure testing results. For the reheater under analysis, the tubes have to be lengthened to achieve a reduction in stresses, arising due to thermal loads to values lower than allowable stresses according to Standard EN 13480-3. The modelling results confirmed the correct operation for the upgraded system.Keywords
Funding Information
- Narodowe Centrum Nauki (UMO-2015/19/B/ST8/00958)
This publication has 10 references indexed in Scilit:
- Combustion Optimization for Coal Fired Power Plant Boilers Based on Improved Distributed ELM and Distributed PSOEnergies, 2019
- On-Coupling Mechanical, Electrical and Thermal Behavior of Submarine Power PhasesEnergies, 2019
- Numerical Study on Flow Characteristics in a Francis Turbine during Load RejectionEnergies, 2019
- A New Empirical Life Prediction Model for 9–12%Cr Steels under Low Cycle Fatigue and Creep Fatigue Interaction LoadingsMetals, 2019
- Analysis of superheater tubes failure2019
- Numerical Study on the Dynamic Behavior of a Francis Turbine Runner Model with a CrackEnergies, 2018
- The Effect of Long-Term Impact of Elevated Temperature on Changes in Microstructure and Mechanical Properties of HR3C SteelArchives of Metallurgy and Materials, 2016
- An analysis of an incident during the renovation work of a power boiler superheaterEngineering Failure Analysis, 2015
- Degradation of microstructure and mechanical properties in martensitic cast steel after ageingMaterialwissenschaft und Werkstofftechnik, 2015
- Life assessment evaluation of piping branch connection under creep and fatigueInternational Journal of Pressure Vessels and Piping, 1997