Multi-walled carbon nanotube reinforced polymer as a bonded repair for Al 2024-T3 fatigue crack growth
Open Access
- 1 January 2018
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 23 (4)
Abstract
The influence on multi walled carbon nanotubes (MWCNT, or simply CNT) as a reinforcement material in an epoxy resin in order to decrease the fatigue crack propagation rate in the 2024 T3 aeronautical Al alloy was studied. CT samples were pre-cracked in a resonant fatigue machine until a 4 mm pre-crack length. Four groups of samples were considered: a non-repaired reference group, two groups repaired with epoxy resin reinforced with two CNT proportions (0.5 and 1 vol %) and a group repaired by the conventional "stop drill" technique. The crack was propagated until a length of 16 mm, measuring the number of cycles to this crack propagation. Resin Hysol EA9320 NA was used, mixing it with the CNT and the hardener, by ultrasonic stirring. S-N curves (stress vs number of cycles) were plotted obtaining an increment of 104% for a 0.5 vol% of CNT, 128% for 1 vol% of CNT and 400% for "stop drill" repairing. These results were referred to the non-repaired samples at the lower load level. These results showed that in repaired samples with CNT reinforced resin, the initiation and propagation of cracks would be delayed, constituting this method a reasonable and convenient repairing procedure useful for aeronautical cracked structures.Keywords
This publication has 21 references indexed in Scilit:
- Thermal conductivity of carbon nanotube reinforced aluminum composites: A multi-scale study using object oriented finite element methodComputational Materials Science, 2010
- Use of carbon nanotubes reinforced epoxy as adhesives to join aluminum platesMaterials & Design (1980-2015), 2010
- Enhancement of delamination fatigue resistance in carbon nanotube reinforced glass fiber/polymer compositesComposites Science and Technology, 2010
- Investigation of carbon nanotube reinforced aluminum matrix composite materialsComposites Science and Technology, 2010
- Carbon nanotube-reinforced aluminium stripsComposites Science and Technology, 2008
- Fabrication and mechanical properties of well-dispersed multiwalled carbon nanotubes/epoxy compositesComposites Science and Technology, 2007
- Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites – A comparative studyComposites Science and Technology, 2005
- Strengthening in carbon nanotube/aluminium (CNT/Al) compositesScripta Materialia, 2005
- Carbon nanotube polymer compositesCurrent Opinion in Solid State and Materials Science, 2004
- Helical microtubules of graphitic carbonNature, 1991